All MIBs › Nortel-MsCarrier-MscPassport-AtmCoreMIB › mscAtmIfVptVccSegSwitchSideLoopbackState
mscAtmIfVptVccSegSwitchSideLoopbackState
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVptVccSegSwitchSideLoopbackState
OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.9.20.120.1.40
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This attribute contains the current state of the switch-side segment loopback for this connection. Switch-side segment loopback cells are transmitted (inserted) by a connection component in the direction of the bus. The value of this attribute is dependent upon the current setting of the segSwitchSideLoopback provisionable attribute, the connection point type as specified by the connectionPointType attribute, and the current loopback state (if applicable).
The value is only applicable when the connectionPointType is a segmentEndPoint.
The value is notApplicable when the connectionPointType is a connectingPoint or connectionEndPoint.
The value is notApplicable when the distributionType is pointToMultipoint.
The value is good when the segSwitchSideLoopback is on, the connectionPointType is a segmentEndPoint and the segment switch side loopback is working.
The value is bad when the segSwitchSideLoopback is on, the connectionPointType is a segmentEndPoint and the switch side segment loopback is not working.
The value is unknown when the segSwitchSideLoopback is off.
The value is unknown when the segSwitchSideLoopback is on, the connectionPointType is a segmentEndPoint and the segment switch side loopback has not been determined.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.20.120.1.40 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVptVccSegSwitchSideLoopbackState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.20.120.1.40.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVptVccSegSwitchSideLoopbackState.1
Start monitoring Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVptVccSegSwitchSideLoopbackState OID value, configure state conditions and alerts, and monitor any Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114 | mscAtmIf | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9 | mscAtmIfVpt | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.20 | mscAtmIfVptVcc | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.120 | mscAtmIfVptVccStatusTable | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.120.1 | mscAtmIfVptVccStatusEntry | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.120.1.40 | mscAtmIfVptVccSegSwitchSideLoopbackState | Nortel-MsCarrier-MscPassport-AtmCoreMIB |