Nortel-MsCarrier-MscPassport-AtmCoreMIB :: mscAtmIfVpcVpdTmUnshapedTransmitQueueing

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-MsCarrier-MscPassport-AtmCoreMIBmscAtmIfVpcVpdTmUnshapedTransmitQueueing

mscAtmIfVpcVpdTmUnshapedTransmitQueueing

Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVpcVpdTmUnshapedTransmitQueueing

OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.4.2.2.100.1.60

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. The two possible methods are per-VC queuing and common queuing.

On ATM IP FPs, this attribute must be set to sameAsCa.

This attribute is ignored in the following situations: - if the connection has trafficShaping enabled or inverseUpc, or - if the atmServiceCategory is availableBitRate, or - if the atmServiceCategory is constantBitRate and this is a CQC- based ATM FP. - for basic Vpts and standard Vpt Vccs

When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the CA.

When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.4.2.2.100.1.60
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVpcVpdTmUnshapedTransmitQueueing

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.4.2.2.100.1.60.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVpcVpdTmUnshapedTransmitQueueing.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.4.2.2.100.1.60.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mscAtmIfVpcVpdTmUnshapedTransmitQueueing.1

Start monitoring Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVpcVpdTmUnshapedTransmitQueueing OID value, configure state conditions and alerts, and monitor any Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.114mscAtmIfNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.4mscAtmIfVpcNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.4.2mscAtmIfVpcVpdNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.4.2.2mscAtmIfVpcVpdTmNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.4.2.2.100mscAtmIfVpcVpdTmProvTableNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.4.2.2.100.1mscAtmIfVpcVpdTmProvEntryNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.4.2.2.100.1.60mscAtmIfVpcVpdTmUnshapedTransmitQueueingNortel-MsCarrier-MscPassport-AtmCoreMIB