All MIBs › Nortel-MsCarrier-MscPassport-AtmCoreMIB › mscAtmIfVpcVpdTmAbrInitialCellRate
mscAtmIfVpcVpdTmAbrInitialCellRate
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVpcVpdTmAbrInitialCellRate
OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.4.2.2.2.110.1.10
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the Initial Cell Rate (ICR) parameter for this connection. ICR is the rate at which a source should send initially and after an idle period.
When this attribute is set to sameAsCa, the initial cell rate is determined by the AtmIf CA Abr/0 icr attribute. When the value of this attribute is set to useMcr, ICR is set to the same value as the Minimum Cell Rate (MCR) for the connection.
When the value of this attribute is set to usePcr, ICR is set to the same value as the Peak Cell Rate (PCR) for the connection.
If this attribute is specified less than the MCR of the connection, then the MCR is used as the ICR. If this attribute is specified more than PCR of the connection, then PCR is used as the ICR.
This attribute is ignored under all conditions where the operational attribute abrConnectionType indicates erSwitch or efciSwitch.
VALUES (
16777216 = sameAsCa
16777217 = useMcr
16777218 = usePcr
)
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.4.2.2.2.110.1.10 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVpcVpdTmAbrInitialCellRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.4.2.2.2.110.1.10.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVpcVpdTmAbrInitialCellRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.4.2.2.2.110.1.10.1 i <value>
Start monitoring Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVpcVpdTmAbrInitialCellRate OID value, configure state conditions and alerts, and monitor any Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114 | mscAtmIf | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4 | mscAtmIfVpc | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.2 | mscAtmIfVpcVpd | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.2.2 | mscAtmIfVpcVpdTm | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.2.2.2 | mscAtmIfVpcVpdTmAbr | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.2.2.2.110 | mscAtmIfVpcVpdTmAbrProvTable | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.2.2.2.110.1 | mscAtmIfVpcVpdTmAbrProvEntry | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.2.2.2.110.1.10 | mscAtmIfVpcVpdTmAbrInitialCellRate | Nortel-MsCarrier-MscPassport-AtmCoreMIB |