All MIBs › Nortel-MsCarrier-MscPassport-AtmCoreMIB › mscAtmIfVpcVpdEndToEndLoopback
mscAtmIfVpcVpdEndToEndLoopback
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVpcVpdEndToEndLoopback
OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.4.2.100.1.30
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether end-to-end loopback insertion should be performed on this connection.
When sameAsInterface is selected, the end-to-end loopback for the connection is based on the endToEndLoopback attribute of the connection's parent AtmIf componentif the ATM interface has end-to-end loopback insertion turned on, then end-to-end loopback insertion is also on for the connection.
When on or off is selected, end-to-end loopback insertion is turned on or off respectively for the connection regardless of the provisioning of the parent AtmIf component.
Note that end-to-end loopback insertion is not possible if the connectionPointType attribute of the Vcc or Vpc component is connectingPoint or segmentEndPoint. End-to-end loopback insertion is also not possible if the distributionType of the Vcc is pointToMultipoint. In such cases, the associated endToEndLoopbackState attribute indicates notApplicable and end- to-end loopback insertion is not performed. End-to-end loopback insertion is always possible on a Vpt.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.4.2.100.1.30 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVpcVpdEndToEndLoopback
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.4.2.100.1.30.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVpcVpdEndToEndLoopback.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.4.2.100.1.30.1 i <value>
Start monitoring Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVpcVpdEndToEndLoopback OID value, configure state conditions and alerts, and monitor any Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114 | mscAtmIf | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4 | mscAtmIfVpc | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.2 | mscAtmIfVpcVpd | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.2.100 | mscAtmIfVpcVpdLbkTable | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.2.100.1 | mscAtmIfVpcVpdLbkEntry | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.2.100.1.30 | mscAtmIfVpcVpdEndToEndLoopback | Nortel-MsCarrier-MscPassport-AtmCoreMIB |