Description: This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters are mapped into this parameter as follows: 0: NoIndication, NoIndication 1: NoIndication, yes 2: NoIndication, no 5: CBR, yes 8: VBR, NoIndication 9: VBR, yes 10: VBR, no A value of notApplicable is displayed in the case of nailed-up PVCs for which this attribute has no significance, or in the case that the transfer capability in the call request was set to NoIndication. The CBR traffic type refers to traffic offered on services such as a constant bit rate video service or a circuit emulation. The VBR traffic type refers to traffic offered on services such as packetized audio and video, or data. The value NoIndication for traffic type is used if the user has not set the traffic type; similarly for end-to-end timing. The value yes for end-to-end timing indicates that end-to-end timing is required for the connection. The value no for end-to-end timing indicates that end-to-end timing is not required for the connection.