All MIBs › Nortel-MsCarrier-MscPassport-AtmCoreMIB › mscAtmIfVccEndToEndLoopbackState
mscAtmIfVccEndToEndLoopbackState
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVccEndToEndLoopbackState
OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.5.120.1.50
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This attribute contains the current state of the end-to-end loopback for this connection. Its value is dependent upon the current setting of the endToEndLoopback provisionable attribute and the connection point type as specified by the connectionPointType attribute.
The value is only applicable when the connectionPointType is a connectionEndPoint.
The value is notApplicable when the connectionPointType is a connectingPoint or segmentEndPoint.
The value is notApplicable when the distributionType is a pointToMultipoint.
The value is good when the endToEndLoopback is on, the connectionPointType is a connectionEndPoint and the end-to-end loopback is working.
The value is bad when the endToEndLoopback is on, the connectionPointType is a connectionEndPoint and the end-to-end loopback is not working.
The value is unknown when the endToEndLoopback is off.
The value is unknown when the endToEndLoopback is on, the connectionPointType is a connectionEndPoint and the end-to-end loopback status has not been determined.
The state of this attribute determines, in part, the value of the operStatus attribute.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.5.120.1.50 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVccEndToEndLoopbackState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.5.120.1.50.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVccEndToEndLoopbackState.1
Start monitoring Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVccEndToEndLoopbackState OID value, configure state conditions and alerts, and monitor any Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114 | mscAtmIf | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.5 | mscAtmIfVcc | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.5.120 | mscAtmIfVccStatusTable | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.5.120.1 | mscAtmIfVccStatusEntry | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.5.120.1.50 | mscAtmIfVccEndToEndLoopbackState | Nortel-MsCarrier-MscPassport-AtmCoreMIB |