All MIBs › Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB › mscAtmIfVpcNrpConnectionPointType
mscAtmIfVpcNrpConnectionPointType
Module: Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB::mscAtmIfVpcNrpConnectionPointType
OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the connection point type desired for a Nrp component. The actual connection point type value is visible in the parent component's connectionPointType attribute.
The desired connection point type can be specified directly as a segmentEndPoint or connectingPoint. If autoConfigure is specified, the switch will select the connection point type based on the type attribute of the associated AtmIf, choosing segmentEndPoint for a UNI-type ATM interface and connectingPoint for a PPI-type ATM interface.
It is obsoleted. The value is mapped into oamSegmentBoundary attribute. segmentEndPoint is mapped into yes. connectingPoint is mapped into no. autoConfigure is mapped into sameAsInterface.
What is mscAtmIfVpcNrpConnectionPointType?
An obsolete attribute that used to specify whether this Vpc Nrp acts as a segment end point or a connecting point for OAM purposes; it has been superseded by mscAtmIfVpcNrpOamSegmentBoundary (segmentEndPoint maps to yes, connectingPoint to no, autoConfigure to sameAsInterface). An admin working with current firmware should set the OAM segment boundary attribute directly rather than this one.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.20 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB::mscAtmIfVpcNrpConnectionPointType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.20.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB::mscAtmIfVpcNrpConnectionPointType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.20.1 i <value>
Start monitoring Nortel MsCarrier MscPassport ATM switch (ATM bearer service/VPC NRP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB::mscAtmIfVpcNrpConnectionPointType OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport ATM switch (ATM bearer service/VPC NRP) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.114 | mscAtmIf | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4 | mscAtmIfVpc | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.4.4 | mscAtmIfVpcNrp | Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.4.100 | mscAtmIfVpcNrpProvTable | Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1 | mscAtmIfVpcNrpProvEntry | Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.20 | mscAtmIfVpcNrpConnectionPointType | Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB |