All MIBs › Nortel-MsCarrier-MscPassport-AtmBaseMIB › mscLpEngArcOvTxCellMemoryAllocation
mscLpEngArcOvTxCellMemoryAllocation
Module: Nortel-MsCarrier-MscPassport-AtmBaseMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmBaseMIB::mscLpEngArcOvTxCellMemoryAllocation
OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the fraction of the transmit memory which should be allocated to the transmission of cells on an FP. The remaining memory is allocated for the transmission of frames. Frame memory is used for trunks, ATM VCC testing and for inter- card communication. Cell memory is used for Atm Bearer Service, ATM SVCs and ATM PVCs.
There is an absolute minimum quantity of frame buffers which is required by ATM software on the FP. If the value of this attribute is smaller than the absolute minimum, the ATM software allocates the minimum required, rather than the actual number requested.
The actual percentage of the transmit memory allocated to the transmit cell memory is indicated by the Arc txCellMemoryAllocation attribute. A difference between the provisioned and the operational values may exist due to the requirement for a minimum number of frame buffers or rounding during computation within the FP.
What is mscLpEngArcOvTxCellMemoryAllocation?
Sets the fraction of transmit memory on this FP allocated to cell traffic versus frame traffic, default 50%; the actual applied value (which can differ slightly due to minimum frame-buffer requirements) is reported back in mscLpEngArcTxCellMemoryAllocation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1.3 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmBaseMIB::mscLpEngArcOvTxCellMemoryAllocation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1.3.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmBaseMIB::mscLpEngArcOvTxCellMemoryAllocation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1.3.1 i <value>
Start monitoring Nortel MsCarrier Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmBaseMIB::mscLpEngArcOvTxCellMemoryAllocation OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.12 | mscLp | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| 1.3.6.1.4.1.562.36.2.1.12.23 | mscLpEng | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.23.5 | mscLpEngArc | Nortel-MsCarrier-MscPassport-AtmBaseMIB |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2 | mscLpEngArcOv | Nortel-MsCarrier-MscPassport-AtmBaseMIB |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10 | mscLpEngArcOvProvTable | Nortel-MsCarrier-MscPassport-AtmBaseMIB |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1 | mscLpEngArcOvProvEntry | Nortel-MsCarrier-MscPassport-AtmBaseMIB |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1.3 | mscLpEngArcOvTxCellMemoryAllocation | Nortel-MsCarrier-MscPassport-AtmBaseMIB |