Nortel-MsCarrier-MscPassport-AtmBaseMIB :: mscLpArcPerVcQueueInterfaces

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmBaseMIB › mscLpArcPerVcQueueInterfaces

mscLpArcPerVcQueueInterfaces

Module: Nortel-MsCarrier-MscPassport-AtmBaseMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmBaseMIB::mscLpArcPerVcQueueInterfaces

OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.19.100.1.25

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name.

This attribute specifies the number of independent ports or IMA components which support shaping and per-Vc queueing on the LogicalProcessor.

When this attribute is not zero, at most 4 independent ports or 4 Ima virtual links are supported, regardless of whether or not traffic shaping is enabled on the associated AtmIf components. In this case only independent port instances 0-3 or Ima instances 0-3 can be supported on an associated AtmIf component.

For 2 ports cards, the valid values for this attribute are 0, 1, or 2. For 3 ports cards, the valid values for this attribute are 0, 1, or 3. For 8 ports cards, the valid values for this attribute are 0, 1, 2, or 4.

What is mscLpArcPerVcQueueInterfaces?

Sets how many independent ports or IMA links on this ATM-FP support per-VC queueing and traffic shaping, e.g. 0, 1, 2, 3 or 4 depending on the card's port count. Obsolete, replaced by the same-named attribute under Lp/n Eng Arc Cqc Ov.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.19.100.1.25
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmBaseMIB::mscLpArcPerVcQueueInterfaces

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.19.100.1.25.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmBaseMIB::mscLpArcPerVcQueueInterfaces.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.12.19.100.1.25.1 i <value>

Start monitoring Nortel MsCarrier Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmBaseMIB::mscLpArcPerVcQueueInterfaces OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport switches from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.12mscLpNortel-MsCarrier-MscPassport-LogicalProcessorMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.12.19mscLpArcNortel-MsCarrier-MscPassport-AtmBaseMIB
1.3.6.1.4.1.562.36.2.1.12.19.100mscLpArcProvTableNortel-MsCarrier-MscPassport-AtmBaseMIB
1.3.6.1.4.1.562.36.2.1.12.19.100.1mscLpArcProvEntryNortel-MsCarrier-MscPassport-AtmBaseMIB
1.3.6.1.4.1.562.36.2.1.12.19.100.1.25mscLpArcPerVcQueueInterfacesNortel-MsCarrier-MscPassport-AtmBaseMIB