All MIBs › Nortel-Magellan-Passport-X25TraceRcvrMIB › traceRcvrX25DnaOutDefaultPathSensitivity
traceRcvrX25DnaOutDefaultPathSensitivity
Module: Nortel-Magellan-Passport-X25TraceRcvrMIB
OID (symbolic): Nortel-Magellan-Passport-X25TraceRcvrMIB::traceRcvrX25DnaOutDefaultPathSensitivity
OID (numeric): 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This attribute specifies the default class of routing (delay/ throughput) for all outgoing calls (from the DTE to the network) using this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). This attribute, if set to a value of throughput, specifies that the default class of routing is throughput sensitive. If set to a value of delay, then the default class of routing is delay sensitive.
This attribute is obsoleted. Please refer to defaultTransferPriority for the corresponding new attribute.
What is traceRcvrX25DnaOutDefaultPathSensitivity?
An obsolete attribute that used to select delay-sensitive vs throughput-sensitive routing for outgoing calls on this Dna; the MIB itself says to use defaultTransferPriority instead, so an admin should not rely on this field on current software.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1.11 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-X25TraceRcvrMIB::traceRcvrX25DnaOutDefaultPathSensitivity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1.11.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-X25TraceRcvrMIB::traceRcvrX25DnaOutDefaultPathSensitivity.1
Start monitoring Nortel Magellan Passport X.25/WAN switch (X.25 packet trace receiver) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-X25TraceRcvrMIB::traceRcvrX25DnaOutDefaultPathSensitivity OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport X.25/WAN switch (X.25 packet trace receiver) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.106 | trace | Nortel-Magellan-Passport-TraceBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.106.2 | traceRcvr | Nortel-Magellan-Passport-TraceBaseMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.106.2.2 | traceRcvrX25 | Nortel-Magellan-Passport-X25TraceRcvrMIB |
| 1.3.6.1.4.1.562.2.4.1.106.2.2.2 | traceRcvrX25Dna | Nortel-Magellan-Passport-X25TraceRcvrMIB |
| 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11 | traceRcvrX25DnaOutgoingOptionsTable | Nortel-Magellan-Passport-X25TraceRcvrMIB |
| 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1 | traceRcvrX25DnaOutgoingOptionsEntry | Nortel-Magellan-Passport-X25TraceRcvrMIB |
| 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1.11 | traceRcvrX25DnaOutDefaultPathSensitivity | Nortel-Magellan-Passport-X25TraceRcvrMIB |