All MIBs › Nortel-Magellan-Passport-VoiceMIB › vsPlcRequiredTxBandwidth
vsPlcRequiredTxBandwidth
Module: Nortel-Magellan-Passport-VoiceMIB
OID (symbolic): Nortel-Magellan-Passport-VoiceMIB::vsPlcRequiredTxBandwidth
OID (numeric): 1.3.6.1.4.1.562.2.4.1.80.3.10.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute gives the bandwidth (in bits per second) reserved by a path on each of the trunks of its route.This attribute represents the bandwidth for traffic outgoing to the remote end point. This value should be chosen to achieve the amount of statistical bandwidth sharing that is desired by the network administration. This reservation is not enforced and is used to determine how many paths can be supported on a trunk. Both ends should be provisioned with the correct values allowing for the fact that transmit at this end represents receive at the remote end. Note that when the values do not correspond, the originating end of the connection determines the value.
What is vsPlcRequiredTxBandwidth?
Sets the outbound bandwidth in bits per second reserved on each trunk of this path's route; the reservation is not strictly enforced but is used to cap how many paths a trunk can carry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.80.3.10.1.5 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VoiceMIB::vsPlcRequiredTxBandwidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.80.3.10.1.5.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-VoiceMIB::vsPlcRequiredTxBandwidth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.80.3.10.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> vsPlcRequiredTxBandwidth.1
Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VoiceMIB::vsPlcRequiredTxBandwidth OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.80 | vs | Nortel-Magellan-Passport-VoiceMIB |
| 1.3.6.1.4.1.562.2.4.1.80.3 | vsPlc | Nortel-Magellan-Passport-VoiceMIB |
| 1.3.6.1.4.1.562.2.4.1.80.3.10 | vsPlcProvTable | Nortel-Magellan-Passport-VoiceMIB |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1 | vsPlcProvEntry | Nortel-Magellan-Passport-VoiceMIB |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.5 | vsPlcRequiredTxBandwidth | Nortel-Magellan-Passport-VoiceMIB |