All MIBs › Nortel-Magellan-Passport-VoiceMIB › vsPlcRemoteName
vsPlcRemoteName
Module: Nortel-Magellan-Passport-VoiceMIB
OID (symbolic): Nortel-Magellan-Passport-VoiceMIB::vsPlcRemoteName
OID (numeric): 1.3.6.1.4.1.562.2.4.1.80.3.10.1.2
Node type: OBJECT-TYPE
Type: AsciiString
Access: read-write
Description: This attribute is the PLC's remote end point's address in the format of a Passport component name The syntax of a component is: 'em/node type/instance'. End points are identified using a node name and a service name. As an example, the end point component name for the third voice service on node MoonBase is: 'EM/MoonBase VS/3'. If the remoteName is provisioned it must match the remote name of the other end or the connection will not be established even if the remote end is provisioned correctly. If no remoteName is provisioned then this LC will accept connections from any other remote LC and it will not originate calls. Connections establish faster and are unique if both ends are provisioned with the remoteName. These strings are case insensitive but the complete component name must be input.
What is vsPlcRemoteName?
Names the remote endpoint of this permanent logical connection using Passport's component-name syntax (e.g. 'EM/MoonBase VS/3'); if left blank the PLC accepts connections from any remote LC but never originates calls, whereas provisioning it on both ends makes connections establish faster and unambiguously.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.80.3.10.1.2 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VoiceMIB::vsPlcRemoteName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.80.3.10.1.2.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-VoiceMIB::vsPlcRemoteName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.80.3.10.1.2.1 s <value>
Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VoiceMIB::vsPlcRemoteName OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.80 | vs | Nortel-Magellan-Passport-VoiceMIB |
| 1.3.6.1.4.1.562.2.4.1.80.3 | vsPlc | Nortel-Magellan-Passport-VoiceMIB |
| 1.3.6.1.4.1.562.2.4.1.80.3.10 | vsPlcProvTable | Nortel-Magellan-Passport-VoiceMIB |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1 | vsPlcProvEntry | Nortel-Magellan-Passport-VoiceMIB |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.2 | vsPlcRemoteName | Nortel-Magellan-Passport-VoiceMIB |