Nortel-Magellan-Passport-VoiceMIB :: vsFramerMaxModemBitRate

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-VoiceMIB › vsFramerMaxModemBitRate

vsFramerMaxModemBitRate

Module: Nortel-Magellan-Passport-VoiceMIB

OID (symbolic): Nortel-Magellan-Passport-VoiceMIB::vsFramerMaxModemBitRate

OID (numeric): 1.3.6.1.4.1.562.2.4.1.80.2.12.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the maximum desired ingress rate used during modemFax and/or fax traffic.

Voice traffic is all traffic from the start of a call or speech until a 2100 Hz tone or call release. ModemFax traffic is all traffic after a 2100 Hz tone but before a fax preamble, speech or call release. Fax traffic is all traffic after a fax preamble but before speech or call release.

If modemFaxEncoding is g711G726, maxModemFaxG711G726Rate specifies the maximum rate used during modemFax traffic and fax traffic. If modemFaxEncoding is faxRelayG711G726, maxModemFaxG711G726Rate specifies the maximum rate used during modemFax traffic only. If modemFaxEncoding is faxRelayOnly or useVoiceEncoding, maxModemFaxG711G726Rate is ignored.

The negotiated maximum ingress modemFax and fax rates are available in negotiatedIgRates.

maxModemFaxG711G726Rate can be set to 16 or 24 only if this voice service is running on a DS1V, E1V, 1pDS1V, 1pE1V or J2MV card.

What is vsFramerMaxModemBitRate?

Sets the maximum ingress bit rate used for modem/fax traffic when modemFaxEncoding is g711G726 or faxRelayG711G726; ignored if modemFaxEncoding is faxRelayOnly or useVoiceEncoding.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.80.2.12.1.3
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VoiceMIB::vsFramerMaxModemBitRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.80.2.12.1.3.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VoiceMIB::vsFramerMaxModemBitRate.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.80.2.12.1.3.1 i <value>

Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VoiceMIB::vsFramerMaxModemBitRate OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.80vsNortel-Magellan-Passport-VoiceMIB
1.3.6.1.4.1.562.2.4.1.80.2vsFramerNortel-Magellan-Passport-VoiceMIB
1.3.6.1.4.1.562.2.4.1.80.2.12vsFramerCoderTableNortel-Magellan-Passport-VoiceMIB
1.3.6.1.4.1.562.2.4.1.80.2.12.1vsFramerCoderEntryNortel-Magellan-Passport-VoiceMIB
1.3.6.1.4.1.562.2.4.1.80.2.12.1.3vsFramerMaxModemBitRateNortel-Magellan-Passport-VoiceMIB