Nortel-Magellan-Passport-VnetMcdnSigMIB :: sigChanMcdnNetworkNameDisplay

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-VnetMcdnSigMIBsigChanMcdnNetworkNameDisplay

sigChanMcdnNetworkNameDisplay

Module: Nortel-Magellan-Passport-VnetMcdnSigMIB

OID (symbolic): Nortel-Magellan-Passport-VnetMcdnSigMIB::sigChanMcdnNetworkNameDisplay

OID (numeric): 1.3.6.1.4.1.562.2.4.1.115.17.19.1.4

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: This attribute specifies what Name Display is supported.

nd1 corresponds to the Meridian 1 RCAP (Remote CAPability) nd1. This translates as caller provides name info in SETUP, ringing party name in ALERTING, redirection name in NOTIFY, and answering party name in CONNECT (as applicable, and if the name changes).

nd2 corresponds to the Meridian 1 RCAP (Remote CAPability) nd2. This translates as caller provides name info in SETUP, answering party provides name in NOTIFY on answer.

nd3 corresponds to the Meridian 1 RCAP (Remote CAPability) nd3, which is nd1 plus name information in call clearing messages (busy user, etc.) where a specific user was found but either could not answer or cleared the call. This corresponds to the QSIG name display.

Description of bits: nameDisplay1(0) nameDisplay2(1) nameDisplay3(2)

What is sigChanMcdnNetworkNameDisplay?

A bitmask specifying which Meridian 1 caller/called-party Name Display capability level (nd1, nd2, or nd3, corresponding to increasingly complete RCAP name-display support up to the QSIG-equivalent nd3) this signalling channel supports.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.115.17.19.1.4
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VnetMcdnSigMIB::sigChanMcdnNetworkNameDisplay

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.115.17.19.1.4.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VnetMcdnSigMIB::sigChanMcdnNetworkNameDisplay.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.115.17.19.1.4.1 s <value>

Start monitoring Nortel Magellan/MsCarrier Passport wide-area switching platform (MCDN voice signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VnetMcdnSigMIB::sigChanMcdnNetworkNameDisplay OID value, configure state conditions and alerts, and monitor any Nortel Magellan/MsCarrier Passport wide-area switching platform (MCDN voice signaling) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.115sigChanNortel-Magellan-Passport-VoiceNetworkingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.115.17sigChanMcdnNortel-Magellan-Passport-VnetMcdnSigMIB
1.3.6.1.4.1.562.2.4.1.115.17.19sigChanMcdnCoTableNortel-Magellan-Passport-VnetMcdnSigMIB
1.3.6.1.4.1.562.2.4.1.115.17.19.1sigChanMcdnCoEntryNortel-Magellan-Passport-VnetMcdnSigMIB
1.3.6.1.4.1.562.2.4.1.115.17.19.1.4sigChanMcdnNetworkNameDisplayNortel-Magellan-Passport-VnetMcdnSigMIB