Nortel-Magellan-Passport-VnetEtsiQsigMIB :: sigChanEQsigFramerOperationalState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-VnetEtsiQsigMIB › sigChanEQsigFramerOperationalState

sigChanEQsigFramerOperationalState

Module: Nortel-Magellan-Passport-VnetEtsiQsigMIB

OID (symbolic): Nortel-Magellan-Passport-VnetEtsiQsigMIB::sigChanEQsigFramerOperationalState

OID (numeric): 1.3.6.1.4.1.562.2.4.1.115.2.2.12.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates the OSI Operational State of the component.

The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service.

The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.

What is sigChanEQsigFramerOperationalState?

This reports the OSI operational state of the Framer component: 'enabled(1)' (available) or 'disabled(0)' (default, something is wrong with the Framer or a dependency), letting an admin isolate whether a QSIG problem is at the framing/hardware layer rather than in the signalling protocol itself.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.115.2.2.12.1.2
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VnetEtsiQsigMIB::sigChanEQsigFramerOperationalState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.115.2.2.12.1.2.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VnetEtsiQsigMIB::sigChanEQsigFramerOperationalState.1

Start monitoring Nortel Magellan Passport switch / PBX voice trunk signaling interface (ETSI QSIG) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VnetEtsiQsigMIB::sigChanEQsigFramerOperationalState OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switch / PBX voice trunk signaling interface (ETSI QSIG) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.115sigChanNortel-Magellan-Passport-VoiceNetworkingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.115.2sigChanEQsigNortel-Magellan-Passport-VnetEtsiQsigMIB
1.3.6.1.4.1.562.2.4.1.115.2.2sigChanEQsigFramerNortel-Magellan-Passport-VnetEtsiQsigMIB
1.3.6.1.4.1.562.2.4.1.115.2.2.12sigChanEQsigFramerStateTableNortel-Magellan-Passport-VnetEtsiQsigMIB
1.3.6.1.4.1.562.2.4.1.115.2.2.12.1sigChanEQsigFramerStateEntryNortel-Magellan-Passport-VnetEtsiQsigMIB
1.3.6.1.4.1.562.2.4.1.115.2.2.12.1.2sigChanEQsigFramerOperationalStateNortel-Magellan-Passport-VnetEtsiQsigMIB