All MIBs › Nortel-Magellan-Passport-VnetEtsiQsigMIB › sigChanEQsigE1ChannelNumbers
sigChanEQsigE1ChannelNumbers
Module: Nortel-Magellan-Passport-VnetEtsiQsigMIB
OID (symbolic): Nortel-Magellan-Passport-VnetEtsiQsigMIB::sigChanEQsigE1ChannelNumbers
OID (numeric): 1.3.6.1.4.1.562.2.4.1.115.2.18.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute is applicable to E1 interfaces only. It specifies the mapping scheme between channel numbers (identified in Layer 3 messages) and timeslot numbers on the E1 link. When the attribute value is skip16, channel numbers map directly to actual E1 timeslots; therefore only channel numbers 1 - 15 and 17 - 31 are expected. When the value is contiguous, channel numbers from 1 - 30 are expected, and the following mapping is used: channels 1 - 15 are mapped to timeslots 1 - 15, and channels 16 - 30 are mapped to timeslots 17 - 31. On T1 interfaces, channel numbers are always expected in the range 1 - 23.
What is sigChanEQsigE1ChannelNumbers?
This applies only to E1 interfaces and selects the channel-to-timeslot mapping scheme: 'skip16(1)' (default, channels 1-15 and 17-31 map directly to E1 timeslots, skipping timeslot 16) or 'contiguous(2)' (channels 1-30 map with 16-30 shifted onto timeslots 17-31); admins must match this to how the connected PBX numbers its channels to avoid a channel-numbering mismatch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.115.2.18.1.2 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VnetEtsiQsigMIB::sigChanEQsigE1ChannelNumbers
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.115.2.18.1.2.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-VnetEtsiQsigMIB::sigChanEQsigE1ChannelNumbers.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.115.2.18.1.2.1 i <value>
Start monitoring Nortel Magellan Passport switch / PBX voice trunk signaling interface (ETSI QSIG) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VnetEtsiQsigMIB::sigChanEQsigE1ChannelNumbers OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switch / PBX voice trunk signaling interface (ETSI QSIG) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.115 | sigChan | Nortel-Magellan-Passport-VoiceNetworkingMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.115.2 | sigChanEQsig | Nortel-Magellan-Passport-VnetEtsiQsigMIB |
| 1.3.6.1.4.1.562.2.4.1.115.2.18 | sigChanEQsigEQsigSpecificProvTable | Nortel-Magellan-Passport-VnetEtsiQsigMIB |
| 1.3.6.1.4.1.562.2.4.1.115.2.18.1 | sigChanEQsigEQsigSpecificProvEntry | Nortel-Magellan-Passport-VnetEtsiQsigMIB |
| 1.3.6.1.4.1.562.2.4.1.115.2.18.1.2 | sigChanEQsigE1ChannelNumbers | Nortel-Magellan-Passport-VnetEtsiQsigMIB |