Nortel-Magellan-Passport-VnetEtsiQsigMIB :: sigChanEQsigAdminState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-VnetEtsiQsigMIB › sigChanEQsigAdminState

sigChanEQsigAdminState

Module: Nortel-Magellan-Passport-VnetEtsiQsigMIB

OID (symbolic): Nortel-Magellan-Passport-VnetEtsiQsigMIB::sigChanEQsigAdminState

OID (numeric): 1.3.6.1.4.1.562.2.4.1.115.2.14.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates the OSI Administrative State of the component.

The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle.

The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down.

The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.

What is sigChanEQsigAdminState?

This reports the OSI administrative state of the QSIG signalling-channel component: 'locked(0)' (administratively blocked from service, requires usageState idle), 'unlocked(1)' (default, permitted to serve users), or 'shuttingDown(2)' (finishing existing calls only after a Lock command). Admins issue Lock/Unlock commands against this component to change the value.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.115.2.14.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VnetEtsiQsigMIB::sigChanEQsigAdminState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.115.2.14.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VnetEtsiQsigMIB::sigChanEQsigAdminState.1

Start monitoring Nortel Magellan Passport switch / PBX voice trunk signaling interface (ETSI QSIG) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VnetEtsiQsigMIB::sigChanEQsigAdminState OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switch / PBX voice trunk signaling interface (ETSI QSIG) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.115sigChanNortel-Magellan-Passport-VoiceNetworkingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.115.2sigChanEQsigNortel-Magellan-Passport-VnetEtsiQsigMIB
1.3.6.1.4.1.562.2.4.1.115.2.14sigChanEQsigStateTableNortel-Magellan-Passport-VnetEtsiQsigMIB
1.3.6.1.4.1.562.2.4.1.115.2.14.1sigChanEQsigStateEntryNortel-Magellan-Passport-VnetEtsiQsigMIB
1.3.6.1.4.1.562.2.4.1.115.2.14.1.1sigChanEQsigAdminStateNortel-Magellan-Passport-VnetEtsiQsigMIB