All MIBs › Nortel-Magellan-Passport-TrunksMIB › trkRemoteValidationAction
trkRemoteValidationAction
Module: Nortel-Magellan-Passport-TrunksMIB
OID (symbolic): Nortel-Magellan-Passport-TrunksMIB::trkRemoteValidationAction
OID (numeric): 1.3.6.1.4.1.562.2.4.1.60.101.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the action to be taken if there is a mismatch between the expectedRemoteNodeName attribute and the value received from the remote end. The remoteValidationAction determines the action when a value is supplied to the expectedRemoteNodeName attribute. If this attribute is provisioned to continue then upon an unsuccessful validation staging continues, otherwise, if disable is set then the Trunk does not continue to stage but, attempts to stage again after a one minute time out. All unsuccessful validation when the expectedRemoteNodeName has been set result in the generation of an alarm.
What is trkRemoteValidationAction?
This read-write setting controls what happens when the remote node name received during staging doesn't match trkExpectedRemoteNodeName: 'continue' lets staging proceed anyway, while 'disable' stops the Trunk from staging and retries after a one-minute timeout, defaulting to 'continue'. An admin sets this to 'disable' on a security-sensitive link to hard-block a mismatched connection rather than merely alarming on it, since either outcome raises an alarm once trkExpectedRemoteNodeName is set.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.101.1.2 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-TrunksMIB::trkRemoteValidationAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.101.1.2.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-TrunksMIB::trkRemoteValidationAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.60.101.1.2.1 i <value>
Start monitoring Nortel Magellan Passport multiservice ATM/Frame Relay WAN switch (trunk interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-TrunksMIB::trkRemoteValidationAction OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice ATM/Frame Relay WAN switch (trunk interfaces) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.60 | trk | Nortel-Magellan-Passport-TrunksMIB |
| 1.3.6.1.4.1.562.2.4.1.60.101 | trkProvTable | Nortel-Magellan-Passport-TrunksMIB |
| 1.3.6.1.4.1.562.2.4.1.60.101.1 | trkProvEntry | Nortel-Magellan-Passport-TrunksMIB |
| 1.3.6.1.4.1.562.2.4.1.60.101.1.2 | trkRemoteValidationAction | Nortel-Magellan-Passport-TrunksMIB |