Nortel-Magellan-Passport-TrunksMIB :: trkControlStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-TrunksMIBtrkControlStatus

trkControlStatus

Module: Nortel-Magellan-Passport-TrunksMIB

OID (symbolic): Nortel-Magellan-Passport-TrunksMIB::trkControlStatus

OID (numeric): 1.3.6.1.4.1.562.2.4.1.60.103.1.6

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.

When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present.

The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics.

The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked.

The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked.

The value suspended indicates that the service has been administratively suspended.

Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)

What is trkControlStatus?

This read-only bitmask reports OSI Control status conditions for the Trunk, such as subjectToTest, partOfServicesLocked, reservedForTest, or suspended, with at most one shown at a time. An admin uses a 'reservedForTest' reading to understand why a locked Trunk is administratively unavailable specifically because it's undergoing a test procedure.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.103.1.6
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-TrunksMIB::trkControlStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.103.1.6.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-TrunksMIB::trkControlStatus.1

Start monitoring Nortel Magellan Passport multiservice ATM/Frame Relay WAN switch (trunk interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-TrunksMIB::trkControlStatus OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice ATM/Frame Relay WAN switch (trunk interfaces) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.60trkNortel-Magellan-Passport-TrunksMIB
1.3.6.1.4.1.562.2.4.1.60.103trkStateTableNortel-Magellan-Passport-TrunksMIB
1.3.6.1.4.1.562.2.4.1.60.103.1trkStateEntryNortel-Magellan-Passport-TrunksMIB
1.3.6.1.4.1.562.2.4.1.60.103.1.6trkControlStatusNortel-Magellan-Passport-TrunksMIB