Nortel-Magellan-Passport-TrunksMIB :: trkAlarmStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-TrunksMIBtrkAlarmStatus

trkAlarmStatus

Module: Nortel-Magellan-Passport-TrunksMIB

OID (symbolic): Nortel-Magellan-Passport-TrunksMIB::trkAlarmStatus

OID (numeric): 1.3.6.1.4.1.562.2.4.1.60.103.1.7

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.

When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present.

The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled.

The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.

The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.

The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.

The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component.

Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)

What is trkAlarmStatus?

This read-only bitmask reports OSI Alarm status conditions for the Trunk -- underRepair, critical, major, minor, or the generic alarmOutstanding -- with at most one shown at a time. An admin uses a 'critical' or 'major' reading here as a quick severity indicator before digging into the specific alarm log entries for this Trunk.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.103.1.7
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-TrunksMIB::trkAlarmStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.103.1.7.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-TrunksMIB::trkAlarmStatus.1

Start monitoring Nortel Magellan Passport multiservice ATM/Frame Relay WAN switch (trunk interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-TrunksMIB::trkAlarmStatus OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice ATM/Frame Relay WAN switch (trunk interfaces) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.60trkNortel-Magellan-Passport-TrunksMIB
1.3.6.1.4.1.562.2.4.1.60.103trkStateTableNortel-Magellan-Passport-TrunksMIB
1.3.6.1.4.1.562.2.4.1.60.103.1trkStateEntryNortel-Magellan-Passport-TrunksMIB
1.3.6.1.4.1.562.2.4.1.60.103.1.7trkAlarmStatusNortel-Magellan-Passport-TrunksMIB