Nortel-Magellan-Passport-ModAtmQosMIB :: modFrsAtmNetTpmAssignedBandwidthPool

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-ModAtmQosMIB › modFrsAtmNetTpmAssignedBandwidthPool

modFrsAtmNetTpmAssignedBandwidthPool

Module: Nortel-Magellan-Passport-ModAtmQosMIB

OID (symbolic): Nortel-Magellan-Passport-ModAtmQosMIB::modFrsAtmNetTpmAssignedBandwidthPool

OID (numeric): 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the bandwidth pool which is used to support this transfer priority. The bandwidth pool is defined in the frAtm Ca component.

What is modFrsAtmNetTpmAssignedBandwidthPool?

This read-write object assigns this transfer priority to one of 16 bandwidth pools, n0 through n15, which are defined elsewhere in the frAtm Ca component, defaulting to pool n0. Admins use bandwidth pools to partition available interface bandwidth among different transfer priorities, ensuring one priority's traffic can't consume bandwidth reserved for another. Setting modFrsAtmNetTpmAssignedBandwidthPool to n2 would allocate this transfer priority's traffic against the bandwidth budget defined for pool 2 in the frAtm Ca component, separate from traffic assigned to other pools.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.5
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-ModAtmQosMIB::modFrsAtmNetTpmAssignedBandwidthPool

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.5.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-ModAtmQosMIB::modFrsAtmNetTpmAssignedBandwidthPool.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.5.1 i <value>

Start monitoring Nortel Magellan Passport WAN switch (module-level Frame Relay-to-ATM QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-ModAtmQosMIB::modFrsAtmNetTpmAssignedBandwidthPool OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (module-level Frame Relay-to-ATM QoS) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.16modNortel-Magellan-Passport-ShelfMIB
1.3.6.1.4.1.562.2.4.1.16.3modFrsNortel-Magellan-Passport-ModCommonMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.16.3.2modFrsAtmNetNortel-Magellan-Passport-ModAtmQosMIB
1.3.6.1.4.1.562.2.4.1.16.3.2.2modFrsAtmNetTpmNortel-Magellan-Passport-ModAtmQosMIB
1.3.6.1.4.1.562.2.4.1.16.3.2.2.2modFrsAtmNetTpmProvTableNortel-Magellan-Passport-ModAtmQosMIB
1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1modFrsAtmNetTpmProvEntryNortel-Magellan-Passport-ModAtmQosMIB
1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.5modFrsAtmNetTpmAssignedBandwidthPoolNortel-Magellan-Passport-ModAtmQosMIB