Nortel-Magellan-Passport-ModAtmQosMIB :: modFrsAtmNetRetryTimerPeriod

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-ModAtmQosMIB › modFrsAtmNetRetryTimerPeriod

modFrsAtmNetRetryTimerPeriod

Module: Nortel-Magellan-Passport-ModAtmQosMIB

OID (symbolic): Nortel-Magellan-Passport-ModAtmQosMIB::modFrsAtmNetRetryTimerPeriod

OID (numeric): 1.3.6.1.4.1.562.2.4.1.16.3.2.10.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the module wide retry timer interval for failed SPVC calls using Frame Relay to ATM Networking. Changes to this attribute will take effect on subsequent call setups.

What is modFrsAtmNetRetryTimerPeriod?

This read-write object configures the module-wide retry timer interval, in seconds, ranging from 30 to 300 with a default of 60, used for retrying failed SPVC, Soft Permanent Virtual Circuit, calls over Frame Relay-to-ATM networking. Admins tune it to control how aggressively the module retries establishing a failed SPVC, though changes only take effect for subsequent call setup attempts rather than in-progress ones. Lowering modFrsAtmNetRetryTimerPeriod from the default 60 to 30 seconds would make the module retry a failed FR-to-ATM SPVC call more quickly after a setup failure.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.16.3.2.10.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-ModAtmQosMIB::modFrsAtmNetRetryTimerPeriod

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.16.3.2.10.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-ModAtmQosMIB::modFrsAtmNetRetryTimerPeriod.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.16.3.2.10.1.1.1 i <value>

Start monitoring Nortel Magellan Passport WAN switch (module-level Frame Relay-to-ATM QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-ModAtmQosMIB::modFrsAtmNetRetryTimerPeriod OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (module-level Frame Relay-to-ATM QoS) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.16modNortel-Magellan-Passport-ShelfMIB
1.3.6.1.4.1.562.2.4.1.16.3modFrsNortel-Magellan-Passport-ModCommonMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.16.3.2modFrsAtmNetNortel-Magellan-Passport-ModAtmQosMIB
1.3.6.1.4.1.562.2.4.1.16.3.2.10modFrsAtmNetProvTableNortel-Magellan-Passport-ModAtmQosMIB
1.3.6.1.4.1.562.2.4.1.16.3.2.10.1modFrsAtmNetProvEntryNortel-Magellan-Passport-ModAtmQosMIB
1.3.6.1.4.1.562.2.4.1.16.3.2.10.1.1modFrsAtmNetRetryTimerPeriodNortel-Magellan-Passport-ModAtmQosMIB