All MIBs › Nortel-Magellan-Passport-IpxMIB › vrIpxDamping
vrIpxDamping
Module: Nortel-Magellan-Passport-IpxMIB
OID (symbolic): Nortel-Magellan-Passport-IpxMIB::vrIpxDamping
OID (numeric): 1.3.6.1.4.1.562.2.4.1.100.7.101.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether damping is applied. Damping refers to the damping of incoming RIP and SAP requests. It handles cases where a rogue client or server is making an extraodinary number of requests. With damping set to disabled, the switch will reply to all requests with no check for rogue nodes.With damping set to enabled, the switch will not reply to a request if the same node made more than the allowable number of requests within 10 seconds. The maximum number of requests to damp at is specified by the following provisionable attributes: ripMaxDampedGeneralRequest, ripMaxDampedSpecificRequests, sapMaxDampedGeneralRequests, sapMaxDampedSpecificRequests.
What is vrIpxDamping?
Enables damping of incoming RIP/SAP requests to guard against a rogue node flooding the router with requests; when enabled, the switch stops replying to a node that exceeds the configured request limits within 10 seconds. Defaults to enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.100.7.101.1.10 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-IpxMIB::vrIpxDamping
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.100.7.101.1.10.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-IpxMIB::vrIpxDamping.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.100.7.101.1.10.1 i <value>
Start monitoring Nortel Magellan Passport multiprotocol WAN switch (Novell IPX/RIP routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-IpxMIB::vrIpxDamping OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiprotocol WAN switch (Novell IPX/RIP routing) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.100 | vr | Nortel-Magellan-Passport-VirtualRouterMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.100.7 | vrIpx | Nortel-Magellan-Passport-IpxMIB |
| 1.3.6.1.4.1.562.2.4.1.100.7.101 | vrIpxProvTable | Nortel-Magellan-Passport-IpxMIB |
| 1.3.6.1.4.1.562.2.4.1.100.7.101.1 | vrIpxProvEntry | Nortel-Magellan-Passport-IpxMIB |
| 1.3.6.1.4.1.562.2.4.1.100.7.101.1.10 | vrIpxDamping | Nortel-Magellan-Passport-IpxMIB |