Nortel-Magellan-Passport-IpiFrMIB :: ipiFrLcnRemoteIpAddress

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-IpiFrMIB › ipiFrLcnRemoteIpAddress

ipiFrLcnRemoteIpAddress

Module: Nortel-Magellan-Passport-IpiFrMIB

OID (symbolic): Nortel-Magellan-Passport-IpiFrMIB::ipiFrLcnRemoteIpAddress

OID (numeric): 1.3.6.1.4.1.562.2.4.1.50.4.12.1.1

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: This attribute specifies the IP address of the remote device connected to this Lcn interface. This device can be a host, and / or a gateway. If the device is a gateway, and StaticRoutes are defined using this gateway, it is recommended that this attribute be set. It is also recommended to set this attribute, if management applications such as Software Download and SNMP, which can initiate IP traffic with Network Management Stations, are potentially using this Lcn interface. IP routing information within IpiFr is not known or activated for this Lcn interface until the remoteIpAddress is known.

When the destination IpAddress is left at its default value of 0.0.0.0, the calling IP address is learnt from the first data packet received.

What is ipiFrLcnRemoteIpAddress?

Admin-provisioned IP address of the remote host or gateway on the other end of this LCN, needed for static routes over this interface and recommended whenever management traffic (SNMP, software download) will use it; left at 0.0.0.0 the address is learned from the first inbound packet instead.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.50.4.12.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-IpiFrMIB::ipiFrLcnRemoteIpAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.50.4.12.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-IpiFrMIB::ipiFrLcnRemoteIpAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.50.4.12.1.1.1 a <value>

Start monitoring Nortel Magellan Passport WAN switch (IP Interworking over Frame Relay) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-IpiFrMIB::ipiFrLcnRemoteIpAddress OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (IP Interworking over Frame Relay) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.50ipiFrNortel-Magellan-Passport-IpiFrMIB
1.3.6.1.4.1.562.2.4.1.50.4ipiFrLcnNortel-Magellan-Passport-IpiFrMIB
1.3.6.1.4.1.562.2.4.1.50.4.12ipiFrLcnProvTableNortel-Magellan-Passport-IpiFrMIB
1.3.6.1.4.1.562.2.4.1.50.4.12.1ipiFrLcnProvEntryNortel-Magellan-Passport-IpiFrMIB
1.3.6.1.4.1.562.2.4.1.50.4.12.1.1ipiFrLcnRemoteIpAddressNortel-Magellan-Passport-IpiFrMIB