All MIBs › Nortel-Magellan-Passport-IpiFrMIB › ipiFrLcnDcTransferPriority
ipiFrLcnDcTransferPriority
Module: Nortel-Magellan-Passport-IpiFrMIB
OID (symbolic): Nortel-Magellan-Passport-IpiFrMIB::ipiFrLcnDcTransferPriority
OID (numeric): 1.3.6.1.4.1.562.2.4.1.50.4.2.10.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the transfer priority to network for the outgoing calls using this particular DLCI. It overRides the defaultTransferPriority provisioned in its associated Dna component.
The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority.
Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), routing metric (delay or throughput).
When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay.
When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput.
The default of transferPriority is useDnaDefTP. It means using the provisioning value under defaultTransferPriority of its associated Dna for this DLCI.
What is ipiFrLcnDcTransferPriority?
Transfer priority for outgoing calls on this DLCI: normal(0), high(9), or useDnaDefTP(255) (the default) to fall back to the Dna's own defaultTransferPriority instead of setting one here.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.50.4.2.10.1.9 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-IpiFrMIB::ipiFrLcnDcTransferPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.50.4.2.10.1.9.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-IpiFrMIB::ipiFrLcnDcTransferPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.50.4.2.10.1.9.1 i <value>
Start monitoring Nortel Magellan Passport WAN switch (IP Interworking over Frame Relay) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-IpiFrMIB::ipiFrLcnDcTransferPriority OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (IP Interworking over Frame Relay) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.50 | ipiFr | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.4 | ipiFrLcn | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.4.2 | ipiFrLcnDc | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.4.2.10 | ipiFrLcnDcOptionsTable | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.4.2.10.1 | ipiFrLcnDcOptionsEntry | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.4.2.10.1.9 | ipiFrLcnDcTransferPriority | Nortel-Magellan-Passport-IpiFrMIB |