All MIBs › Nortel-Magellan-Passport-IpiFrMIB › ipiFrLcnAlarmStatus
ipiFrLcnAlarmStatus
Module: Nortel-Magellan-Passport-IpiFrMIB
OID (symbolic): Nortel-Magellan-Passport-IpiFrMIB::ipiFrLcnAlarmStatus
OID (numeric): 1.3.6.1.4.1.562.2.4.1.50.4.10.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present.
The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component.
Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
What is ipiFrLcnAlarmStatus?
Bitmap of OSI alarm-severity conditions currently outstanding against this LCN (underRepair, critical, major, minor, alarmOutstanding) -- the first thing an admin should check when troubleshooting a misbehaving LCN.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.50.4.10.1.7 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-IpiFrMIB::ipiFrLcnAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.50.4.10.1.7.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-IpiFrMIB::ipiFrLcnAlarmStatus.1
Start monitoring Nortel Magellan Passport WAN switch (IP Interworking over Frame Relay) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-IpiFrMIB::ipiFrLcnAlarmStatus OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (IP Interworking over Frame Relay) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.50 | ipiFr | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.4 | ipiFrLcn | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.4.10 | ipiFrLcnStateTable | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.4.10.1 | ipiFrLcnStateEntry | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.4.10.1.7 | ipiFrLcnAlarmStatus | Nortel-Magellan-Passport-IpiFrMIB |