All MIBs › Nortel-Magellan-Passport-IpiFrMIB › ipiFrDnaDefaultTransferPriority
ipiFrDnaDefaultTransferPriority
Module: Nortel-Magellan-Passport-IpiFrMIB
OID (symbolic): Nortel-Magellan-Passport-IpiFrMIB::ipiFrDnaDefaultTransferPriority
OID (numeric): 1.3.6.1.4.1.562.2.4.1.50.2.11.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the default transfer priority to network for all outgoing calls using this particular Dna. It is overRidden by the transferPriority provisioned in the DLCI Direct Call sub- component.
The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority.
Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), routing metric (delay or throughput).
When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay.
When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput.
The default of defaultTransferPriority is high.
What is ipiFrDnaDefaultTransferPriority?
Default transfer priority (normal(0) or high(9), defaulting to high) applied to outgoing calls from this Dna, which in turn sets the trunk-queue and routing-metric behavior for those calls unless overridden by the DLCI's own setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.50.2.11.1.18 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-IpiFrMIB::ipiFrDnaDefaultTransferPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.50.2.11.1.18.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-IpiFrMIB::ipiFrDnaDefaultTransferPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.50.2.11.1.18.1 i <value>
Start monitoring Nortel Magellan Passport WAN switch (IP Interworking over Frame Relay) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-IpiFrMIB::ipiFrDnaDefaultTransferPriority OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (IP Interworking over Frame Relay) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.50 | ipiFr | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.2 | ipiFrDna | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.2.11 | ipiFrDnaOutgoingOptionsTable | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.2.11.1 | ipiFrDnaOutgoingOptionsEntry | Nortel-Magellan-Passport-IpiFrMIB |
| 1.3.6.1.4.1.562.2.4.1.50.2.11.1.18 | ipiFrDnaDefaultTransferPriority | Nortel-Magellan-Passport-IpiFrMIB |