All MIBs › Nortel-Magellan-Passport-ImaMIB › lpImaProtocol
lpImaProtocol
Module: Nortel-Magellan-Passport-ImaMIB
OID (symbolic): Nortel-Magellan-Passport-ImaMIB::lpImaProtocol
OID (numeric): 1.3.6.1.4.1.562.2.4.1.12.22.10.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies what protocol the component should run. If atmForum10 is chosen, the ATM Forum's IMA protocol (version 1.0) will be used and signalled in outgoing IMA Control Protocol (ICP) cells. This protocol is specified in version 1.1 of the ATM Forum IMA specification. The IMA group will come up only if the far end IMA also uses the ATM Forum's IMA protocol. If proprietary is chosen, Nortel's proprietary IMA protocol will be used. The IMA group will come up only if the far end IMA also uses Nortel's proprietary IMA protocol. This IMA group will not inter-operate with IMA implementations from other vendors. Feature ima must be provisioned on the LP for this protocol to be used.
What is lpImaProtocol?
The IMA signalling protocol this group runs — atmForum10 (default, standard ATM Forum IMA 1.0, required to interoperate with other vendors) or proprietary (Nortel's own IMA variant, requiring the far end to also use it). An admin picks proprietary only when both ends of the bundle are Nortel Passport equipment provisioned for it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.22.10.1.6 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-ImaMIB::lpImaProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.22.10.1.6.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-ImaMIB::lpImaProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.12.22.10.1.6.1 i <value>
Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-ImaMIB::lpImaProtocol OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.12 | lp | Nortel-Magellan-Passport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.22 | lpIma | Nortel-Magellan-Passport-ImaMIB |
| 1.3.6.1.4.1.562.2.4.1.12.22.10 | lpImaProvTable | Nortel-Magellan-Passport-ImaMIB |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1 | lpImaProvEntry | Nortel-Magellan-Passport-ImaMIB |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1.6 | lpImaProtocol | Nortel-Magellan-Passport-ImaMIB |