All MIBs › Nortel-Magellan-Passport-HdlcTransparentMIB › htdsPlcRequiredTxBandwidth
htdsPlcRequiredTxBandwidth
Module: Nortel-Magellan-Passport-HdlcTransparentMIB
OID (symbolic): Nortel-Magellan-Passport-HdlcTransparentMIB::htdsPlcRequiredTxBandwidth
OID (numeric): 1.3.6.1.4.1.562.2.4.1.82.3.10.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute gives the bandwidth (in bits per second) reserved by a path on each of the trunks of its route. This attribute represents the bandwidth for traffic outgoing to the remote end point. This value should be chosen to achieve the amount of statistical bandwidth sharing that is desired by the network administration. This reservation is not enforced and is used to determine how many paths can be supported on a trunk. Both ends should be provisioned with the correct values allowing for the fact that Transmit at this end represents Receive at the remote end. Note that when the values do not correspond the originating end of the connection determines the value.
What is htdsPlcRequiredTxBandwidth?
Reserves the transmit bandwidth (in bits per second, default 64000) this connection requests on each trunk along its route, sized to whatever level of statistical bandwidth sharing the network admin wants. This reservation isn't enforced traffic-shaping, just used to compute how many paths a trunk can support.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.82.3.10.1.5 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-HdlcTransparentMIB::htdsPlcRequiredTxBandwidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.82.3.10.1.5.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-HdlcTransparentMIB::htdsPlcRequiredTxBandwidth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.82.3.10.1.5.1 i <value>
Start monitoring Nortel Magellan Passport multiservice switch (HDLC transparent leased-line service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-HdlcTransparentMIB::htdsPlcRequiredTxBandwidth OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (HDLC transparent leased-line service) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.82 | htds | Nortel-Magellan-Passport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.82.3 | htdsPlc | Nortel-Magellan-Passport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.82.3.10 | htdsPlcProvTable | Nortel-Magellan-Passport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1 | htdsPlcProvEntry | Nortel-Magellan-Passport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.5 | htdsPlcRequiredTxBandwidth | Nortel-Magellan-Passport-HdlcTransparentMIB |