All MIBs › Nortel-Magellan-Passport-HdlcTransparentMIB › htdsPlcRemoteName
htdsPlcRemoteName
Module: Nortel-Magellan-Passport-HdlcTransparentMIB
OID (symbolic): Nortel-Magellan-Passport-HdlcTransparentMIB::htdsPlcRemoteName
OID (numeric): 1.3.6.1.4.1.562.2.4.1.82.3.10.1.2
Node type: OBJECT-TYPE
Type: AsciiString
Access: read-write
Description: This attribute is the PLC's remote end point's address in the format of a Passport component name The syntax of a component is: 'em/node type/instance'. End points are identified using a node name and a service name. As an example, the end point component name for the third voice service on node MoonBase is: 'EM/MoonBase VS/3'. If the remoteName is provisioned it must match the remote name of the other end or the connection will not be established even if the remote end is provisioned correctly. If no remoteName is provisioned then this LC will accept connections from any other remote LC and it will not originate calls. Connections establish faster and are unique if both ends are provisioned with the remoteName. These strings are case insensitive but the complete component name must be input.
What is htdsPlcRemoteName?
Configures the Passport component name of the remote endpoint this permanent logical connection should connect to, in the form 'EM/nodeName servicetype/instance'. If left blank, this end accepts connections from any remote LC but won't originate calls itself.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.82.3.10.1.2 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-HdlcTransparentMIB::htdsPlcRemoteName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.82.3.10.1.2.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-HdlcTransparentMIB::htdsPlcRemoteName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.82.3.10.1.2.1 s <value>
Start monitoring Nortel Magellan Passport multiservice switch (HDLC transparent leased-line service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-HdlcTransparentMIB::htdsPlcRemoteName OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (HDLC transparent leased-line service) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.82 | htds | Nortel-Magellan-Passport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.82.3 | htdsPlc | Nortel-Magellan-Passport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.82.3.10 | htdsPlcProvTable | Nortel-Magellan-Passport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1 | htdsPlcProvEntry | Nortel-Magellan-Passport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.2 | htdsPlcRemoteName | Nortel-Magellan-Passport-HdlcTransparentMIB |