All MIBs › Nortel-Magellan-Passport-HdlcTransparentMIB › htdsLCoOverrideRemoteName
htdsLCoOverrideRemoteName
Module: Nortel-Magellan-Passport-HdlcTransparentMIB
OID (symbolic): Nortel-Magellan-Passport-HdlcTransparentMIB::htdsLCoOverrideRemoteName
OID (numeric): 1.3.6.1.4.1.562.2.4.1.82.4.10.1.2
Node type: OBJECT-TYPE
Type: AsciiString
Access: read-write
Description: If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unlock the service component which will result in this new overrideRemoteName being used as if it had been provisioned into the PLC remoteName. The advantage of this attribute is that the connection's remoteName can be changed immediately without having to 'activate prov' but the disadvantage is that the overrideRemoteName is not permanent and if the card or switch is reset the override will be lost.
What is htdsLCoOverrideRemoteName?
Overrides a blank PLC remoteName with this value once the parent service is locked/unlocked, letting an admin redirect this connection to a different remote endpoint immediately without a full 'activate prov' cycle. Because it isn't stored permanently, a card or switch reset clears the override.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.82.4.10.1.2 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-HdlcTransparentMIB::htdsLCoOverrideRemoteName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.82.4.10.1.2.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-HdlcTransparentMIB::htdsLCoOverrideRemoteName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.82.4.10.1.2.1 s <value>
Start monitoring Nortel Magellan Passport multiservice switch (HDLC transparent leased-line service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-HdlcTransparentMIB::htdsLCoOverrideRemoteName OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (HDLC transparent leased-line service) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.82 | htds | Nortel-Magellan-Passport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.82.4 | htdsLCo | Nortel-Magellan-Passport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.82.4.10 | htdsLCoPathDataTable | Nortel-Magellan-Passport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1 | htdsLCoPathDataEntry | Nortel-Magellan-Passport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.2 | htdsLCoOverrideRemoteName | Nortel-Magellan-Passport-HdlcTransparentMIB |