Nortel-Magellan-Passport-HdlcTransparentMIB :: htdsFramerLineSignalTransport

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-HdlcTransparentMIB › htdsFramerLineSignalTransport

htdsFramerLineSignalTransport

Module: Nortel-Magellan-Passport-HdlcTransparentMIB

OID (symbolic): Nortel-Magellan-Passport-HdlcTransparentMIB::htdsFramerLineSignalTransport

OID (numeric): 1.3.6.1.4.1.562.2.4.1.82.2.11.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute determines how modem status lead information on a V35 or V11 port is handled. When the value of the attribute is set to on, line signal changes are passed transparently through the network to the remote end of the connection, where they are passed out on that end's outgoing leads. When the value of the attribute is set to off, line signal changes are not transparently passed through the network. Both ends must be provisioned to support this function for line signal transport to work. It is highly recommended that line signal interpretation is set to 'don't care' on the associated vport component (ie. vport attributes readyLineState and dataTransferLineState).

What is htdsFramerLineSignalTransport?

Controls whether modem status lead (line signal) changes on a V35 or V11 port are transparently carried across the network to the far end's outgoing leads. Both ends must enable this for line signal transport to actually work.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.82.2.11.1.8
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-HdlcTransparentMIB::htdsFramerLineSignalTransport

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.82.2.11.1.8.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-HdlcTransparentMIB::htdsFramerLineSignalTransport.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.82.2.11.1.8.1 i <value>

Start monitoring Nortel Magellan Passport multiservice switch (HDLC transparent leased-line service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-HdlcTransparentMIB::htdsFramerLineSignalTransport OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (HDLC transparent leased-line service) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.82htdsNortel-Magellan-Passport-HdlcTransparentMIB
1.3.6.1.4.1.562.2.4.1.82.2htdsFramerNortel-Magellan-Passport-HdlcTransparentMIB
1.3.6.1.4.1.562.2.4.1.82.2.11htdsFramerLinkTableNortel-Magellan-Passport-HdlcTransparentMIB
1.3.6.1.4.1.562.2.4.1.82.2.11.1htdsFramerLinkEntryNortel-Magellan-Passport-HdlcTransparentMIB
1.3.6.1.4.1.562.2.4.1.82.2.11.1.8htdsFramerLineSignalTransportNortel-Magellan-Passport-HdlcTransparentMIB