All MIBs › Nortel-Magellan-Passport-GsmIwfMIB › gsmCsLpAssignedCapacity
gsmCsLpAssignedCapacity
Module: Nortel-Magellan-Passport-GsmIwfMIB
OID (symbolic): Nortel-Magellan-Passport-GsmIwfMIB::gsmCsLpAssignedCapacity
OID (numeric): 1.3.6.1.4.1.562.2.4.1.127.7.10.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This attribute indicates what percentage (0 to 100%) of a given LogicalProcessor has been reserved for the data calls which are currently active. When the assignedCapacity reaches 100%, no new calls are established on the given LogicalProcessor. During the life of a call, the compute requirements will vary. The compute capacity required for a given call type depends on the type of call established including such factors as connection type, data compression, user rate, error correction, flow control; therefore, at call establishment the compute capacity is added to the assignedCapacity for a LogicalProcessor. When the call is released, it's compute capacity is subtracted from the assigned capacity for the Lp.The GsmIwfCallServer uses this information to balance the distribution of data calls across the logical processors.
What is gsmCsLpAssignedCapacity?
A percentage (0-100%) of this Logical Processor's compute capacity currently reserved by active data calls, which the GsmIwfCallServer consults to load-balance new calls across its Lps; once it reaches 100% no new call is placed on that particular Logical Processor, since different call types (compression, error correction, flow control) consume differing amounts of compute headroom.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.127.7.10.1.3 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-GsmIwfMIB::gsmCsLpAssignedCapacity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.127.7.10.1.3.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-GsmIwfMIB::gsmCsLpAssignedCapacity.1
Start monitoring Nortel Magellan Passport multiservice switch (GSM circuit-data interworking) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-GsmIwfMIB::gsmCsLpAssignedCapacity OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (GSM circuit-data interworking) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.127 | gsmCs | Nortel-Magellan-Passport-GsmIwfMIB |
| 1.3.6.1.4.1.562.2.4.1.127.7 | gsmCsLp | Nortel-Magellan-Passport-GsmIwfMIB |
| 1.3.6.1.4.1.562.2.4.1.127.7.10 | gsmCsLpOperTable | Nortel-Magellan-Passport-GsmIwfMIB |
| 1.3.6.1.4.1.562.2.4.1.127.7.10.1 | gsmCsLpOperEntry | Nortel-Magellan-Passport-GsmIwfMIB |
| 1.3.6.1.4.1.562.2.4.1.127.7.10.1.3 | gsmCsLpAssignedCapacity | Nortel-Magellan-Passport-GsmIwfMIB |