Nortel-Magellan-Passport-GsmIwfMIB :: gsmBcLastResponseCode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-GsmIwfMIB › gsmBcLastResponseCode

gsmBcLastResponseCode

Module: Nortel-Magellan-Passport-GsmIwfMIB

OID (symbolic): Nortel-Magellan-Passport-GsmIwfMIB::gsmBcLastResponseCode

OID (numeric): 1.3.6.1.4.1.562.2.4.1.128.101.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates the MSC/IWF Interface Protocol (MIP) response code returned for the last call which was active on this particular GsmIwfBearerChannel. Valid values are: requestDone, the call was terminated normally. systemError, the call was terminated due to a base system problem. applicationError, the call was terminated due to an application level problem. noResources, the call was terminated due to a lack of available resources. msgSizeMismatch, Message length does not match length defined by the MSC/IWF Interface Protocol for the particular message type. protocolViolation, Failed to perform the request because the coding of the request message was invalid; message was not understood. requestNotSupported, Message was understood but not supported by the IWF or MSC. requestDenied, Message was understood and supported by the IWF or MSC but the request is denied. invalidMessage, Message received is invalid for the current state of the IWF's state machine or the MSC data call state machine. The message is ignored. bufferNotFlushed, Message from the Iwf to the MSC indicating that the buffers are not flushed as requested by the MSC. notApplicable, this attribute is not applicable for this call. This is the default value for this attribute.

What is gsmBcLastResponseCode?

The MIP response code recorded for the last call handled by this bearer channel, such as requestDone (normal termination), noResources, protocolViolation, or requestDenied; operators check this first when a channel's most recent call ended unexpectedly, since it distinguishes a clean hangup from a resource, protocol, or messaging failure at the IWF or MSC.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.128.101.1.9
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-GsmIwfMIB::gsmBcLastResponseCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.128.101.1.9.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-GsmIwfMIB::gsmBcLastResponseCode.1

Start monitoring Nortel Magellan Passport multiservice switch (GSM circuit-data interworking) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-GsmIwfMIB::gsmBcLastResponseCode OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (GSM circuit-data interworking) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.128gsmBcNortel-Magellan-Passport-GsmIwfMIB
1.3.6.1.4.1.562.2.4.1.128.101gsmBcOperTableNortel-Magellan-Passport-GsmIwfMIB
1.3.6.1.4.1.562.2.4.1.128.101.1gsmBcOperEntryNortel-Magellan-Passport-GsmIwfMIB
1.3.6.1.4.1.562.2.4.1.128.101.1.9gsmBcLastResponseCodeNortel-Magellan-Passport-GsmIwfMIB