Nortel-Magellan-Passport-Frf5EpMIB :: mcsMgrFrf5EpGEpOperationalState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-Frf5EpMIB › mcsMgrFrf5EpGEpOperationalState

mcsMgrFrf5EpGEpOperationalState

Module: Nortel-Magellan-Passport-Frf5EpMIB

OID (symbolic): Nortel-Magellan-Passport-Frf5EpMIB::mcsMgrFrf5EpGEpOperationalState

OID (numeric): 1.3.6.1.4.1.562.2.4.1.122.14.3.10.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates the OSI Operational State of the component.

The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service.

The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.

The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.

What is mcsMgrFrf5EpGEpOperationalState?

Reports whether this FRF.5 endpoint is actually functioning: enabled(1) means available for operation, disabled(0, the default) means something is wrong with it or a dependency. Even when administratively unlocked, a disabled operational state means the endpoint still isn't passing traffic, which is the key distinction admins check when a configured endpoint isn't working.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.122.14.3.10.1.2
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-Frf5EpMIB::mcsMgrFrf5EpGEpOperationalState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.122.14.3.10.1.2.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-Frf5EpMIB::mcsMgrFrf5EpGEpOperationalState.1

Start monitoring Nortel Magellan Passport Frame Relay/ATM interworking switch (FRF.5) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-Frf5EpMIB::mcsMgrFrf5EpGEpOperationalState OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport Frame Relay/ATM interworking switch (FRF.5) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.122mcsMgrNortel-Magellan-Passport-McsMgrMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.122.14mcsMgrFrf5EpGNortel-Magellan-Passport-Frf5EpMIB
1.3.6.1.4.1.562.2.4.1.122.14.3mcsMgrFrf5EpGEpNortel-Magellan-Passport-Frf5EpMIB
1.3.6.1.4.1.562.2.4.1.122.14.3.10mcsMgrFrf5EpGEpStateTableNortel-Magellan-Passport-Frf5EpMIB
1.3.6.1.4.1.562.2.4.1.122.14.3.10.1mcsMgrFrf5EpGEpStateEntryNortel-Magellan-Passport-Frf5EpMIB
1.3.6.1.4.1.562.2.4.1.122.14.3.10.1.2mcsMgrFrf5EpGEpOperationalStateNortel-Magellan-Passport-Frf5EpMIB