All MIBs › Nortel-Magellan-Passport-Frf5EpMIB › mcsMgrFrf5EpGEpLmiErrorEventThreshold
mcsMgrFrf5EpGEpLmiErrorEventThreshold
Module: Nortel-Magellan-Passport-Frf5EpMIB
OID (symbolic): Nortel-Magellan-Passport-Frf5EpMIB::mcsMgrFrf5EpGEpLmiErrorEventThreshold
OID (numeric): 1.3.6.1.4.1.562.2.4.1.122.14.3.2.10.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: For the network side procedure, an event is defined as follows: (1) receipt of a STATUS ENQUIRY message, or (2) expiration of timer T392. An error event is (1) nonreceipt of STATUS ENQUIRY in T392 seconds; (2) invalid format of an LMI message; (3) invalid receive sequence number. For the user side procedure, an event is defined as a polling cycle or a status enquiry and status report exchange. An error event is (1) non-receipt of a STATUS within the polling cycle, or (2) invalid format of an LMI message, or (3) invalid sequence number.
This attribute specifies the number of error events which, if they occur within eventCount events, will cause a protocol error condition. The condition is cleared after eventCount sequential correct events occur.
It must be less than or equal to eventCount (n393).
What is mcsMgrFrf5EpGEpLmiErrorEventThreshold?
Sets the number of LMI error events (1-10, default 3) that, if they occur within the eventCount window, trigger a protocol error condition on this endpoint's LMI. This threshold must be less than or equal to mcsMgrFrf5EpGEpLmiEventCount, and tuning it controls how tolerant the LMI is of occasional glitches before declaring a protocol failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.122.14.3.2.10.1.3 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-Frf5EpMIB::mcsMgrFrf5EpGEpLmiErrorEventThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.122.14.3.2.10.1.3.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-Frf5EpMIB::mcsMgrFrf5EpGEpLmiErrorEventThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.122.14.3.2.10.1.3.1 i <value>
Start monitoring Nortel Magellan Passport Frame Relay/ATM interworking switch (FRF.5) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-Frf5EpMIB::mcsMgrFrf5EpGEpLmiErrorEventThreshold OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport Frame Relay/ATM interworking switch (FRF.5) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.122 | mcsMgr | Nortel-Magellan-Passport-McsMgrMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.122.14 | mcsMgrFrf5EpG | Nortel-Magellan-Passport-Frf5EpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.14.3 | mcsMgrFrf5EpGEp | Nortel-Magellan-Passport-Frf5EpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.14.3.2 | mcsMgrFrf5EpGEpLmi | Nortel-Magellan-Passport-Frf5EpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.14.3.2.10 | mcsMgrFrf5EpGEpLmiParmsTable | Nortel-Magellan-Passport-Frf5EpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.14.3.2.10.1 | mcsMgrFrf5EpGEpLmiParmsEntry | Nortel-Magellan-Passport-Frf5EpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.14.3.2.10.1.3 | mcsMgrFrf5EpGEpLmiErrorEventThreshold | Nortel-Magellan-Passport-Frf5EpMIB |