All MIBs › Nortel-Magellan-Passport-Frf5EpMIB › mcsMgrFrf5EpGEpDlciABitReasonToIf
mcsMgrFrf5EpGEpDlciABitReasonToIf
Module: Nortel-Magellan-Passport-Frf5EpMIB
OID (symbolic): Nortel-Magellan-Passport-Frf5EpMIB::mcsMgrFrf5EpGEpDlciABitReasonToIf
OID (numeric): 1.3.6.1.4.1.562.2.4.1.122.14.3.4.10.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This attribute indicates the reason for the latest inactive A-bit status sent to the ATM VCC. The value is notApplicable when the aBitStatusToNetwork is active. The value is remoteUserSignaled if the FrAtm originating the A-Bit status has detected that the virtual circuit is down at the remote network through the LMI protocol. The FrAtm must be running network site LMI protocol for this A-Bit status reason to be sent. The value is localLmiError if the LMI protocol is down at this Ep. The value is remoteLmiError if the LMI protocol is down at the FrAtm originating this A-Bit status reason. The value is localLinkDown if the physical interface is disabled at this Ep. The value is pvcDown if no A-Bit status has been sent to this Ep (i.e., no A-Bit status has been relayed from the FrAtm). The value is remoteLinkDown if the physical interface is disabled at the FrAtm originating this A-Bit status reason.
What is mcsMgrFrf5EpGEpDlciABitReasonToIf?
Reports why this DLCI's A-bit status sent toward the ATM VCC was last marked inactive, one of notApplicable(0, the default when active), remoteUserSignaled(1), localLmiError(2), remoteLmiError(3), localLinkDown(4), remoteLinkDown(5), or pvcDown(6). This is the field to check to pin down exactly why this virtual circuit is being reported down toward the network side.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.122.14.3.4.10.1.2 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-Frf5EpMIB::mcsMgrFrf5EpGEpDlciABitReasonToIf
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.122.14.3.4.10.1.2.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-Frf5EpMIB::mcsMgrFrf5EpGEpDlciABitReasonToIf.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mcsMgrFrf5EpGEpDlciABitReasonToIf.1
Start monitoring Nortel Magellan Passport Frame Relay/ATM interworking switch (FRF.5) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-Frf5EpMIB::mcsMgrFrf5EpGEpDlciABitReasonToIf OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport Frame Relay/ATM interworking switch (FRF.5) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.122 | mcsMgr | Nortel-Magellan-Passport-McsMgrMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.122.14 | mcsMgrFrf5EpG | Nortel-Magellan-Passport-Frf5EpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.14.3 | mcsMgrFrf5EpGEp | Nortel-Magellan-Passport-Frf5EpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.14.3.4 | mcsMgrFrf5EpGEpDlci | Nortel-Magellan-Passport-Frf5EpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.14.3.4.10 | mcsMgrFrf5EpGEpDlciOperTable | Nortel-Magellan-Passport-Frf5EpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.14.3.4.10.1 | mcsMgrFrf5EpGEpDlciOperEntry | Nortel-Magellan-Passport-Frf5EpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.14.3.4.10.1.2 | mcsMgrFrf5EpGEpDlciABitReasonToIf | Nortel-Magellan-Passport-Frf5EpMIB |