Nortel-Magellan-Passport-FrameRelayUniTraceMIB :: frUniTraceReceiverName

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-FrameRelayUniTraceMIB › frUniTraceReceiverName

frUniTraceReceiverName

Module: Nortel-Magellan-Passport-FrameRelayUniTraceMIB

OID (symbolic): Nortel-Magellan-Passport-FrameRelayUniTraceMIB::frUniTraceReceiverName

OID (numeric): 1.3.6.1.4.1.562.2.4.1.71.7.10.1.2

Node type: OBJECT-TYPE

Type: AsciiString

Access: read-write

Description: This attribute should be set to the name of the desired trace receiver before starting a trace session. All available trace receivers are listed under the Trace Rcvr/ component. This attribute cannot be set while a trace is active.

What is frUniTraceReceiverName?

This attribute names the trace receiver that captured trace data should be sent to, chosen from the receivers listed under the Trace Rcvr component, and it cannot be changed while a trace is already active. Admins must set this before starting a trace session so the switch knows where to forward the captured Frame Relay UNI data. For example, an admin would set this to the name of a configured trace receiver like 'Rcvr1' before issuing the command to start the trace.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.71.7.10.1.2
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayUniTraceMIB::frUniTraceReceiverName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.71.7.10.1.2.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayUniTraceMIB::frUniTraceReceiverName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.71.7.10.1.2.1 s <value>

Start monitoring Nortel Magellan Passport WAN switch (Frame Relay UNI protocol trace) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayUniTraceMIB::frUniTraceReceiverName OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (Frame Relay UNI protocol trace) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.71frUniNortel-Magellan-Passport-FrameRelayUniMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.71.7frUniTraceNortel-Magellan-Passport-FrameRelayUniTraceMIB
1.3.6.1.4.1.562.2.4.1.71.7.10frUniTraceOperationalTableNortel-Magellan-Passport-FrameRelayUniTraceMIB
1.3.6.1.4.1.562.2.4.1.71.7.10.1frUniTraceOperationalEntryNortel-Magellan-Passport-FrameRelayUniTraceMIB
1.3.6.1.4.1.562.2.4.1.71.7.10.1.2frUniTraceReceiverNameNortel-Magellan-Passport-FrameRelayUniTraceMIB