All MIBs › Nortel-Magellan-Passport-FrameRelayUniMIB › frUniLmiProcedures
frUniLmiProcedures
Module: Nortel-Magellan-Passport-FrameRelayUniMIB
OID (symbolic): Nortel-Magellan-Passport-FrameRelayUniMIB::frUniLmiProcedures
OID (numeric): 1.3.6.1.4.1.562.2.4.1.71.4.10.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute selects the procedures to be used for the Local Management Interface. The following procedures are supported:
none: no Local Management Interface procedures are running on this interface. This accommodates Frame Relay user equipment that has not implemented any LMI procedures. The remaining attributes of this group are ignored.
vendorForum: Local Management Interface procedures from the Vendor Forum specification are supported on this interface. DLCI 1023 is used for the LMI protocol. This value cannot be used if the side attribute is both.
ansi: Local Management Interface procedures from the ANSI specification are supported. DLCI 0 is used for the LMI protocol.
itu: Local Management Interface procedures from the ITU-T specification are supported. DLCI 0 is used for the LMI protocol. Was previously ccitt.
autoConfigure: The interface determines automatically which Local Management Interface procedures to use. This value cannot be used if the side attribute is user.
The procedures currently in use can be seen in the operational attribute opProcedures.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.71.4.10.1.1 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayUniMIB::frUniLmiProcedures
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.71.4.10.1.1.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayUniMIB::frUniLmiProcedures.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.71.4.10.1.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> frUniLmiProcedures.1
Start monitoring Nortel Magellan Passport packet switch (Frame Relay UNI/DLCI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayUniMIB::frUniLmiProcedures OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport packet switch (Frame Relay UNI/DLCI) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.71 | frUni | Nortel-Magellan-Passport-FrameRelayUniMIB |
| 1.3.6.1.4.1.562.2.4.1.71.4 | frUniLmi | Nortel-Magellan-Passport-FrameRelayUniMIB |
| 1.3.6.1.4.1.562.2.4.1.71.4.10 | frUniLmiParmsTable | Nortel-Magellan-Passport-FrameRelayUniMIB |
| 1.3.6.1.4.1.562.2.4.1.71.4.10.1 | frUniLmiParmsEntry | Nortel-Magellan-Passport-FrameRelayUniMIB |
| 1.3.6.1.4.1.562.2.4.1.71.4.10.1.1 | frUniLmiProcedures | Nortel-Magellan-Passport-FrameRelayUniMIB |