Nortel-Magellan-Passport-FrameRelayUniMIB :: frUniLmiOpProcedures

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-FrameRelayUniMIB › frUniLmiOpProcedures

frUniLmiOpProcedures

Module: Nortel-Magellan-Passport-FrameRelayUniMIB

OID (symbolic): Nortel-Magellan-Passport-FrameRelayUniMIB::frUniLmiOpProcedures

OID (numeric): 1.3.6.1.4.1.562.2.4.1.71.4.12.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The opProcedures attribute indicates the procedures being used for the Local Management Interface. This attribute should be ignored if protocolStatus is not normalCondition. The following procedures are supported:

none: Local Management Interface procedures are not running on this interface. This accommodates Frame Relay user equipment that has not implemented any LMI procedures.

vendorForum: Local Management Interface procedures from the Vendor Forum specification are running on this interface. DLCI 1023 is used for the LMI protocol.

ansi: Local Management Interface procedures from the ANSI specification are running. DLCI 0 is used for the LMI protocol.

itu: Local Management Interface procedures from the ITU-T specification are running. DLCI 0 is used for the LMI protocol. Was previously ccitt.

unknown: Local Management Interface procedures have yet to be determined by Adaptive LMI.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.71.4.12.1.2
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayUniMIB::frUniLmiOpProcedures

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.71.4.12.1.2.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayUniMIB::frUniLmiOpProcedures.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> frUniLmiOpProcedures.1

Start monitoring Nortel Magellan Passport packet switch (Frame Relay UNI/DLCI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayUniMIB::frUniLmiOpProcedures OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport packet switch (Frame Relay UNI/DLCI) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.71frUniNortel-Magellan-Passport-FrameRelayUniMIB
1.3.6.1.4.1.562.2.4.1.71.4frUniLmiNortel-Magellan-Passport-FrameRelayUniMIB
1.3.6.1.4.1.562.2.4.1.71.4.12frUniLmiPsiTableNortel-Magellan-Passport-FrameRelayUniMIB
1.3.6.1.4.1.562.2.4.1.71.4.12.1frUniLmiPsiEntryNortel-Magellan-Passport-FrameRelayUniMIB
1.3.6.1.4.1.562.2.4.1.71.4.12.1.2frUniLmiOpProceduresNortel-Magellan-Passport-FrameRelayUniMIB