Nortel-Magellan-Passport-FrameRelayNniTraceMIB :: frNniTraceReceiverName

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-FrameRelayNniTraceMIB › frNniTraceReceiverName

frNniTraceReceiverName

Module: Nortel-Magellan-Passport-FrameRelayNniTraceMIB

OID (symbolic): Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceReceiverName

OID (numeric): 1.3.6.1.4.1.562.2.4.1.70.7.10.1.2

Node type: OBJECT-TYPE

Type: AsciiString

Access: read-write

Description: This attribute should be set to the name of the desired trace receiver before starting a trace session. All available trace receivers are listed under the Trace Rcvr/ component. This attribute cannot be set while a trace is active.

What is frNniTraceReceiverName?

This read-write string, up to 8 ASCII characters, must be set to the name of the desired trace receiver before starting a trace session, chosen from receivers listed under the Trace Rcvr component, and it cannot be changed while a trace is active. Admins set this to direct captured Frame Relay NNI trace data to a specific configured receiver. For example, setting it to RCVR1 directs trace output to that named receiver before starting the session.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.70.7.10.1.2
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceReceiverName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.70.7.10.1.2.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceReceiverName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.70.7.10.1.2.1 s <value>

Start monitoring Nortel Magellan Passport Frame Relay switch (NNI protocol trace capture) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceReceiverName OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport Frame Relay switch (NNI protocol trace capture) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.70frNniNortel-Magellan-Passport-FrameRelayNniMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.70.7frNniTraceNortel-Magellan-Passport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.2.4.1.70.7.10frNniTraceOperationalTableNortel-Magellan-Passport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.2.4.1.70.7.10.1frNniTraceOperationalEntryNortel-Magellan-Passport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.2.4.1.70.7.10.1.2frNniTraceReceiverNameNortel-Magellan-Passport-FrameRelayNniTraceMIB