All MIBs › Nortel-Magellan-Passport-FrameRelayNniTraceMIB › frNniTraceQueueLimit
frNniTraceQueueLimit
Module: Nortel-Magellan-Passport-FrameRelayNniTraceMIB
OID (symbolic): Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceQueueLimit
OID (numeric): 1.3.6.1.4.1.562.2.4.1.70.7.10.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the total number of bytes of traced data which may be queued for transmission to the trace receiver. When this limit is exceeded, incoming traced frames are discarded. This attribute can be set while a trace is active and takes effect immediately.
What is frNniTraceQueueLimit?
This read-write value, from 1 to 100 and defaulting to 20, sets the total bytes of traced data that may be queued for transmission to the trace receiver, after which incoming traced frames are discarded, and it can be changed live during an active trace. Admins tune this to control how much buffering the trace session uses before dropping frames when the receiver can't keep up. For example, raising it above the default of 20 gives the trace more buffer headroom during bursts of traced traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.70.7.10.1.4 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceQueueLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.70.7.10.1.4.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceQueueLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.70.7.10.1.4.1 i <value>
Start monitoring Nortel Magellan Passport Frame Relay switch (NNI protocol trace capture) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceQueueLimit OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport Frame Relay switch (NNI protocol trace capture) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.70 | frNni | Nortel-Magellan-Passport-FrameRelayNniMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.70.7 | frNniTrace | Nortel-Magellan-Passport-FrameRelayNniTraceMIB |
| 1.3.6.1.4.1.562.2.4.1.70.7.10 | frNniTraceOperationalTable | Nortel-Magellan-Passport-FrameRelayNniTraceMIB |
| 1.3.6.1.4.1.562.2.4.1.70.7.10.1 | frNniTraceOperationalEntry | Nortel-Magellan-Passport-FrameRelayNniTraceMIB |
| 1.3.6.1.4.1.562.2.4.1.70.7.10.1.4 | frNniTraceQueueLimit | Nortel-Magellan-Passport-FrameRelayNniTraceMIB |