All MIBs › Nortel-Magellan-Passport-FrameRelayNniTraceMIB › frNniTraceFilterTracedLength
frNniTraceFilterTracedLength
Module: Nortel-Magellan-Passport-FrameRelayNniTraceMIB
OID (symbolic): Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceFilterTracedLength
OID (numeric): 1.3.6.1.4.1.562.2.4.1.70.7.2.10.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the maximum number of bytes to trace per frame starting from the byte following the frame flag. If the frame length is longer than the value specified by this attribute, then the traced frame is truncated. This attribute can be set while a trace is active and takes effect immediately.
What is frNniTraceFilterTracedLength?
This read-write value, from 1 to 2000 and defaulting to 2000, specifies the maximum number of bytes to trace per frame starting after the frame flag, truncating longer frames, and it can be changed live during an active trace. Admins lower this to reduce the volume of captured trace data per frame when only header information is needed. For example, setting it to 64 captures just the first 64 bytes of each traced frame, truncating the rest.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.70.7.2.10.1.4 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceFilterTracedLength
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.70.7.2.10.1.4.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceFilterTracedLength.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.70.7.2.10.1.4.1 i <value>
Start monitoring Nortel Magellan Passport Frame Relay switch (NNI protocol trace capture) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceFilterTracedLength OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport Frame Relay switch (NNI protocol trace capture) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.70 | frNni | Nortel-Magellan-Passport-FrameRelayNniMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.70.7 | frNniTrace | Nortel-Magellan-Passport-FrameRelayNniTraceMIB |
| 1.3.6.1.4.1.562.2.4.1.70.7.2 | frNniTraceFilter | Nortel-Magellan-Passport-FrameRelayNniTraceMIB |
| 1.3.6.1.4.1.562.2.4.1.70.7.2.10 | frNniTraceFilterOperationalTable | Nortel-Magellan-Passport-FrameRelayNniTraceMIB |
| 1.3.6.1.4.1.562.2.4.1.70.7.2.10.1 | frNniTraceFilterOperationalEntry | Nortel-Magellan-Passport-FrameRelayNniTraceMIB |
| 1.3.6.1.4.1.562.2.4.1.70.7.2.10.1.4 | frNniTraceFilterTracedLength | Nortel-Magellan-Passport-FrameRelayNniTraceMIB |