Nortel-Magellan-Passport-FrameRelayNniTraceMIB :: frNniTraceFilterTracedDlci

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-FrameRelayNniTraceMIB › frNniTraceFilterTracedDlci

frNniTraceFilterTracedDlci

Module: Nortel-Magellan-Passport-FrameRelayNniTraceMIB

OID (symbolic): Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceFilterTracedDlci

OID (numeric): 1.3.6.1.4.1.562.2.4.1.70.7.2.10.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies a particular Dlci to trace. A value of zero specifies that all Dlcis are to be traced. This attribute can be set while a trace is active and takes effect immediately.

What is frNniTraceFilterTracedDlci?

This read-write value, from 0 to 1007 and defaulting to 0, specifies a particular DLCI to trace, where 0 means all DLCIs are traced, and it can be changed live during an active trace. Admins set this to narrow a Frame Relay trace down to a single virtual circuit instead of capturing every DLCI on the interface. For example, setting it to 100 restricts the trace to frames belonging to DLCI 100.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.70.7.2.10.1.2
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceFilterTracedDlci

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.70.7.2.10.1.2.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceFilterTracedDlci.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.70.7.2.10.1.2.1 i <value>

Start monitoring Nortel Magellan Passport Frame Relay switch (NNI protocol trace capture) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayNniTraceMIB::frNniTraceFilterTracedDlci OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport Frame Relay switch (NNI protocol trace capture) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.70frNniNortel-Magellan-Passport-FrameRelayNniMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.70.7frNniTraceNortel-Magellan-Passport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.2.4.1.70.7.2frNniTraceFilterNortel-Magellan-Passport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.2.4.1.70.7.2.10frNniTraceFilterOperationalTableNortel-Magellan-Passport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.2.4.1.70.7.2.10.1frNniTraceFilterOperationalEntryNortel-Magellan-Passport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.2.4.1.70.7.2.10.1.2frNniTraceFilterTracedDlciNortel-Magellan-Passport-FrameRelayNniTraceMIB