Nortel-Magellan-Passport-FrameRelayNniMIB :: frNniLmiProcedures

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-FrameRelayNniMIB › frNniLmiProcedures

frNniLmiProcedures

Module: Nortel-Magellan-Passport-FrameRelayNniMIB

OID (symbolic): Nortel-Magellan-Passport-FrameRelayNniMIB::frNniLmiProcedures

OID (numeric): 1.3.6.1.4.1.562.2.4.1.70.4.10.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute selects the procedures to be used for the Local Management Interface. The following are the supported procedures:

none: Local Management Interface procedures are not running on this interface. This accommodates Frame Relay user equipment which didn't implement any LMI procedures. In this case, the remaining attributes of this group are ignored.

ansi: Local Management Interface procedures from the ANSI specification are supported. DLCI 0 is used for the LMI protocol.

itu: Local Management Interface procedures from the ITU-T specification are supported. DLCI 0 is used for the LMI protocol. Was previously ccitt.

autoConfigure: The interface determines automatically which Local Management Interface procedures to use.

The procedures currently being used can be seen in the operational attribute opProcedures.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.70.4.10.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayNniMIB::frNniLmiProcedures

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.70.4.10.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayNniMIB::frNniLmiProcedures.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.70.4.10.1.1.1 i <value>

Start monitoring Nortel Magellan Passport multiservice switch (Frame Relay NNI trunks) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayNniMIB::frNniLmiProcedures OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (Frame Relay NNI trunks) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.70frNniNortel-Magellan-Passport-FrameRelayNniMIB
1.3.6.1.4.1.562.2.4.1.70.4frNniLmiNortel-Magellan-Passport-FrameRelayNniMIB
1.3.6.1.4.1.562.2.4.1.70.4.10frNniLmiParmsTableNortel-Magellan-Passport-FrameRelayNniMIB
1.3.6.1.4.1.562.2.4.1.70.4.10.1frNniLmiParmsEntryNortel-Magellan-Passport-FrameRelayNniMIB
1.3.6.1.4.1.562.2.4.1.70.4.10.1.1frNniLmiProceduresNortel-Magellan-Passport-FrameRelayNniMIB