Nortel-Magellan-Passport-FrameRelayDteMIB :: frDteStDlciExcessBurstAction

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-FrameRelayDteMIB › frDteStDlciExcessBurstAction

frDteStDlciExcessBurstAction

Module: Nortel-Magellan-Passport-FrameRelayDteMIB

OID (symbolic): Nortel-Magellan-Passport-FrameRelayDteMIB::frDteStDlciExcessBurstAction

OID (numeric): 1.3.6.1.4.1.562.2.4.1.101.6.10.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the action taken when the committedBurst size has been exceeded on the DLCI but the excessBurst size has not. If the attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay header will be turned on. If the attribute is set to none, no action will be taken.

What is frDteStDlciExcessBurstAction?

Sets what happens when this static DLCI exceeds its committed burst but not its excess burst: none (default) or setDeBit (mark the Discard Eligibility bit in the Frame Relay header). An admin sets this to setDeBit on a specific PVC so its excess traffic is marked for preferential discard under network congestion rather than dropped locally or passed unmarked.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.101.6.10.1.6
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayDteMIB::frDteStDlciExcessBurstAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.101.6.10.1.6.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayDteMIB::frDteStDlciExcessBurstAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.101.6.10.1.6.1 i <value>

Start monitoring Nortel Magellan Passport multiservice switch (Frame Relay DTE/DLCI access) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayDteMIB::frDteStDlciExcessBurstAction OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (Frame Relay DTE/DLCI access) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.101frDteNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.6frDteStDlciNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.6.10frDteStDlciProvTableNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.6.10.1frDteStDlciProvEntryNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.6.10.1.6frDteStDlciExcessBurstActionNortel-Magellan-Passport-FrameRelayDteMIB