Nortel-Magellan-Passport-FrameRelayDteMIB :: frDteRgAdminState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-FrameRelayDteMIB › frDteRgAdminState

frDteRgAdminState

Module: Nortel-Magellan-Passport-FrameRelayDteMIB

OID (symbolic): Nortel-Magellan-Passport-FrameRelayDteMIB::frDteRgAdminState

OID (numeric): 1.3.6.1.4.1.562.2.4.1.101.4.13.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates the OSI Administrative State of the component.

The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle.

The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down.

The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.

What is frDteRgAdminState?

Reports the OSI administrative state of the Remote Group: locked, shuttingDown, or unlocked (the default), controlled by Lock/Unlock commands. An admin locks a Remote Group to stop provisioning changes or new sessions on its DLCIs while existing traffic (if shuttingDown) drains.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.101.4.13.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayDteMIB::frDteRgAdminState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.101.4.13.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayDteMIB::frDteRgAdminState.1

Start monitoring Nortel Magellan Passport multiservice switch (Frame Relay DTE/DLCI access) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayDteMIB::frDteRgAdminState OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (Frame Relay DTE/DLCI access) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.101frDteNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.4frDteRgNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.4.13frDteRgStateTableNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.4.13.1frDteRgStateEntryNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.4.13.1.1frDteRgAdminStateNortel-Magellan-Passport-FrameRelayDteMIB