All MIBs › Nortel-Magellan-Passport-FrameRelayDteMIB › frDteDynDlciDefsRateEnforcement
frDteDynDlciDefsRateEnforcement
Module: Nortel-Magellan-Passport-FrameRelayDteMIB
OID (symbolic): Nortel-Magellan-Passport-FrameRelayDteMIB::frDteDynDlciDefsRateEnforcement
OID (numeric): 1.3.6.1.4.1.562.2.4.1.101.5.10.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user DLCI.
If rateEnforcement is enabled, and the combined Committed and Excess burst thresholds are exceeded, the frame in violation will be discarded immediately if a HibernationQueue subcomponent is not provisioned under the StDlci component. If a HibernationQueue is provisioned, the frame will be placed on the HibernationQueue at time of violation and transmission will be attempted later after the point at which the burst thresholds will no longer be exceeded.
Setting all the CIR attributes to zero has the same affect as setting this attribute to disabled.
What is frDteDynDlciDefsRateEnforcement?
Sets whether the default CIR attributes (committedInformationRate, committedBurst, excessBurst) will enforce a rate limit on DLCIs that are dynamically created on this interface (default disabled). An admin enables this to have every newly auto-created (dynamic) PVC automatically rate-limited using the values below, rather than allowed to burst freely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.101.5.10.1.2 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayDteMIB::frDteDynDlciDefsRateEnforcement
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.101.5.10.1.2.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayDteMIB::frDteDynDlciDefsRateEnforcement.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.101.5.10.1.2.1 i <value>
Start monitoring Nortel Magellan Passport multiservice switch (Frame Relay DTE/DLCI access) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayDteMIB::frDteDynDlciDefsRateEnforcement OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (Frame Relay DTE/DLCI access) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.101 | frDte | Nortel-Magellan-Passport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.2.4.1.101.5 | frDteDynDlciDefs | Nortel-Magellan-Passport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.2.4.1.101.5.10 | frDteDynDlciDefsProvTable | Nortel-Magellan-Passport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.2.4.1.101.5.10.1 | frDteDynDlciDefsProvEntry | Nortel-Magellan-Passport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.2.4.1.101.5.10.1.2 | frDteDynDlciDefsRateEnforcement | Nortel-Magellan-Passport-FrameRelayDteMIB |