All MIBs › Nortel-Magellan-Passport-FrameRelayDteMIB › frDteDlciRateEnforcement
frDteDlciRateEnforcement
Module: Nortel-Magellan-Passport-FrameRelayDteMIB
OID (symbolic): Nortel-Magellan-Passport-FrameRelayDteMIB::frDteDlciRateEnforcement
OID (numeric): 1.3.6.1.4.1.562.2.4.1.101.8.11.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user DLCI.
If rateEnforcement is enabled, and the combined Committed and Excess burst thresholds are exceeded, the frame in violation will be discarded immediately if a HibernationQueue subcomponent is not provisioned under the StDlci component (static entries only). If a HibernationQueue is provisioned, the frame will be placed on the HibernationQueue at time of violation and transmission will be attempted later after the point at which the burst thresholds will no longer be exceeded.
Setting all the CIR attributes to zero has the same affect as setting this attribute to disabled.
Setting this attribute will operationally override the corresponding provisional value on static entries.
What is frDteDlciRateEnforcement?
Would set whether this DLCI's CIR attributes (committedInformationRate, committedBurst, excessBurst) enforce a rate limit, overriding the corresponding provisioned value on static entries when set. Note: the source MIB explicitly marks this table as 'THIS TABLE CURRENTLY NOT IMPLEMENTED' in this MIB revision, so on real Passport hardware this object may not return live data even though it is formally defined.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.101.8.11.1.17 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayDteMIB::frDteDlciRateEnforcement
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.101.8.11.1.17.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayDteMIB::frDteDlciRateEnforcement.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.101.8.11.1.17.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> frDteDlciRateEnforcement.1
Start monitoring Nortel Magellan Passport multiservice switch (Frame Relay DTE/DLCI access) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayDteMIB::frDteDlciRateEnforcement OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (Frame Relay DTE/DLCI access) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.101 | frDte | Nortel-Magellan-Passport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.2.4.1.101.8 | frDteDlci | Nortel-Magellan-Passport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.2.4.1.101.8.11 | frDteDlciOperTable | Nortel-Magellan-Passport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1 | frDteDlciOperEntry | Nortel-Magellan-Passport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.17 | frDteDlciRateEnforcement | Nortel-Magellan-Passport-FrameRelayDteMIB |