Nortel-Magellan-Passport-FrameRelayDteMIB :: frDteDlciExcessBurstAction

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-FrameRelayDteMIB › frDteDlciExcessBurstAction

frDteDlciExcessBurstAction

Module: Nortel-Magellan-Passport-FrameRelayDteMIB

OID (symbolic): Nortel-Magellan-Passport-FrameRelayDteMIB::frDteDlciExcessBurstAction

OID (numeric): 1.3.6.1.4.1.562.2.4.1.101.8.11.1.21

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the action taken when the committedBurst size has been exceeded on the Dlci but the excessBurst size has not. If the attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay header will be turned on. If the attribute is set to none, no action will be taken.

Setting this attribute will operationally override the corresponding provisional value on static entries.

What is frDteDlciExcessBurstAction?

Would set the action taken when the committed burst is exceeded but the excess burst is not: none (default) or setDeBit, overriding the provisioned value on static entries when set. Note: the source MIB explicitly marks this table as 'THIS TABLE CURRENTLY NOT IMPLEMENTED' in this MIB revision, so on real Passport hardware this object may not return live data even though it is formally defined.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.101.8.11.1.21
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayDteMIB::frDteDlciExcessBurstAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.101.8.11.1.21.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayDteMIB::frDteDlciExcessBurstAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.101.8.11.1.21.1 i <value>

Start monitoring Nortel Magellan Passport multiservice switch (Frame Relay DTE/DLCI access) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayDteMIB::frDteDlciExcessBurstAction OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (Frame Relay DTE/DLCI access) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.101frDteNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.8frDteDlciNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.8.11frDteDlciOperTableNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.8.11.1frDteDlciOperEntryNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.8.11.1.21frDteDlciExcessBurstActionNortel-Magellan-Passport-FrameRelayDteMIB